![](/2022/pdf/670/200/bg2.jpg)
Amphenol Canada Corp. Page 2 of 2
605 Milner Avenue
Toronto, Ontario, Canada, M1B 5X6 Copyright © Amphenol Corporation 2011 • All rights reserved
+1 416 291 4401
www.amphenolcanada.com
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.
S6032C Rev 1.3
Electrical Characteristics
Contact resistance: 20 mΩ max.
Insulation resistance: 500 MΩ minimum at 500V DC for 2 minutes max.
Current rating: 1.5 Amps
Voltage rating: 125 Volts AC
DWV 1000 VAC, 60 Hz. 1 min.
LED forward DC current: 20mA typical
LED forward Voltage: 1.9 Volts max. @ 2mA (for single colors)
2.6 Volts max. @ 20mA (for Bi-colors)
LED reverse voltage: 5 Volts minimum
LED light intensity: 0.4 to 1.5 mcd @ 2mA (for single colors)
0.5 mcd min. @ 2mA (for Bi-colors)
LED wave length: Yellow: 587± 7 nm measured @ 20mA
Green: 565± 6 nm measured @ 20mA
Red: 625± 5 nm measured @ 20mA
Mechanical Characteristics
Mating connector insertion force: 5.0 lbs. Maximum.
Mating connector pull retention force: 20 lbs Minimum.
Durability: 750 mating & unmating cycles
Recommended soldering temperature: Wave soldering peaked at 260° C for 5 seconds maximum.
Connectors without LED’s are suitable for IR Reflow
Operating temperature: -55° C to +85° C
Material Requirements
RJHSE connectors are RoHS compliant.
Unless otherwise specified, the materials for each component shall be:
Insulator:
High Temp thermoplastic. Complies with UL 94V-0, Black color
Contacts:
Phosphor Bronze hard temper with gold thickness options (6µ”, 15µ”, 30µ”, 50µ”) over
50µ” minimum Nickel on contact mating area.
100µ” minimum matte tin plating on soldering tail
Shield:
Stainless Steel with tin dipped tails
LED:
Tin plating on LED tails
Available Documents
Drawing Numbers:
P-RJHSE-5XXX-XXX 8 Position Modular Jack, optional LEDs and Shielding, 1, 2, 4, 5, 6 and 8 port versions
P-RJHSE-7XXX-XXX 6 Position Modular Jack, Optional LEDs and Shielding, 1, 2 and 4 port versions
P-RJHSE-3XXX-XXX Vertical Mount, Single Port Modular Jack, Optional LEDs and Shielding
P-RJHSE-LXXX-XXX Low Profile Modular Jack, Optional LEDs and Shielding, 1 and 2 port versions
Contact factory or Authorized Amphenol representative for additional configurations
About Amphenol
Commercial Products
Amphenol’s commercial
connector products are
used in a variety of end
user applications
including networking,
telecom, server &
computer, storage &
HDD, consumer
electronics and
entertainment,
professional audio &
Industrial &
Military/Aerospace.
Related Products
RJSSE
RJSAE
P/NRJSSE‐5081SHOWN
SINGLEPORT,8POSITION,
WITHSHIELDANDLIGHTPIPE
P/NRJSAE‐5385‐02SHOWN
STACKED2x1,8POSITION,
WITHSHIELDANDLEDs