RHT NIFG Hand Crimp Tool
Doc No. ATS-640034200 Release Date: 09-22-03 UCOTROLLED COPY Page 7 of 7
Revision: C Revision Date: 03-25-10
Certificate of Calibration
Tool Order Number __________________
Tool Eng. Number ___________________
Tool Revision ___________________
Serial Number ___________________
Date of Manufacture__________________
Handle Load Range at 1 inch from the Tips =______________
Actual =_____________
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = ____________-- Actual = ______________
Range Conductor Nest # 2 = ____________-- Actual = ______________
Range Insulation Grip Nest # 3 = ____________-- Actual = ______________
Technician ______________
Date of Calibration ______________
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Americas
Headquarters
Lisle, Illinois 60532
U.S.A.
1-800-78MOLEX
amerinfo@molex.com
Far East orth
Headquarters
Yamato, Kanagawa, Japan
81-462-65-2324
feninfo@molex.com
Far East South
Headquarters
Jurong,
Singapore
65-6-268-6868
fesinfo@molex.c
om
European
Headquarters
Munich, Germany
49-89-413092-0
eurinfo@molex.com
Corporate
Headquarters
2222 Wellington Ct.
Lisle, IL 60532 U.S.A.
630-969-4550
Fax: 630-969-1352
Visit our Web site at http://www.molex.com
