ACPL-P302/W302
0.4 Amp Output Current IGBT Gate Driver Optocouplers
Data Sheet
Description
The ACPL-P302/W302 consists of a GaAsP LED optically
coupled to an integrated circuit with a power output
stage. These optocouplers are ideally suited for driving
power IGBTs and MOSFETs used in motor control invert-
er applications. The high operating voltage range of the
output stage provides the drive voltages required by gate
controlled devices. The voltage and current supplied by
this optocoupler makes it ideally suited for directly driving
small or medium power IGBTs.
Applications
x Isolated IGBT/Power MOSFET gate drive
x AC and brushless DC motor drives
x Industrial inverters
x Inverter for home appliances
x Induction cooker
x Switching Power Supplies (SPS)
Functional Diagram
Features
x High speed response.
x Ultra high CMR.
x Bootstrappable supply current.
x Available in Stretched SO-6 package
x Package Clearance/Creepage at 8mm (ACPL-W302)
x Safety Approval:
UL1577 recognized with 3750 Vrms for 1 minute for
ACPL-P302 and 5000 Vrms for 1 minute for ACPL-
W302.
CSA Approved.
IEC/EN/DIN EN 60747-5-2 Approved
V
IORM
= 891 Vpeak for ACPL-P302
V
IORM
= 1140 Vpeak for ACPL-W302
Specications
x 0.4 A maximum peak output current.
x 0.2 A minimum peak output current.
x 0.7 μs maximum propagation delay over temperature
range.
x I
CC(max)
= 3 mA maximum supply current.
x 10 kV/μs minimum common mode rejection (CMR) at
V
CM
= 1000 V.
x Wide V
CC
operating range: 10 V to 30 V over tempera-
ture range.
x Wide operating temperature range: –40°C to 100°C.
Note: A 0.1 μF bypass
apacitor must be connected
between pins V
CC
and V
EE
.
61
52
43
ANODE
N.C.
CATHODE
V
CC
V
O
V
EE
SHIELD
Truth Table
LED VO
OFF LOW
ON HIGH
CAUTION: IT IS ADVISED THAT NORMAL STATIC PRECAUTIONS BE TAKEN IN HANDLING AND ASSEMBLY
OF THIS COMPONENT TO PREVENT DAMAGE AND/OR DEGRADATION WHICH MAY BE INDUCED BY ESD.
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
