7
■Product Specifications
Rating
Current rating: 0.4A DC
Operating Temperature Range:_40 to +70ç (Note 1)
Storage Temperature Range:_10 to +50ç (Note 2)
Voltage rating: 50V AC
Operating Humidity Range:Relative humidity, 90% max.
Storage Humidity Range:Relative humidity, 90% max.
(Not dewed) (Not dewed)
Applicable FPC
t=0.3±0.05 Solder plating(Note 3) t=0.18 ± 0.05 for FH12F-*S-0.5SH
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation.
Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (05) specification.
■Material
Part Material Finish Remarks
Insulator
Polyamide Color : Beige
UL94V-0
PPS Color : Deep brown
Contact Phosphor bronze Solder plating
–––––––
Macal Fittings Brass Solder plating
■Ordering Information
FH12 A - 10 (4) - S A - 0.5 SH (05)
qerw yt u i o
q Series Name : FH12
w Blank : standard type
A : Top contact type
S : Type with strengthed lock lever
F : Type with 0.18mm FPC End Thickness
e Standard type : Number of contacts
Eccentric type :
Number of contacts in 0.5mm housing
r Standard type : Blank
Eccentric type : Number of contacts
t Contact alignment: Single
y Eccentric direction:
Blank : standard type
A : Eccentric type
u Contacts Pitch : 0.5mm, 1mm
i Contact type
SH
:
SMT horizontal mounting type
SV
:
SMT vertical mounting type
Plating specification
No symbol: Solder plating
(05): Gold plating
o
1. Insulation resistance 500M ohms minimum 100V DC
2. Withstanding voltage No flashover or insulation breakdown. 150V AC/1 minute
3. Contact resistance 50m ohms maximum 1mA
4.
Durability (Insertion/withdrawal)
Contact resistance: 50m ohms maximum
20 cycles
No damage, cracks, or parts dislocation.
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
5. Vibration Contact resistance: 50m ohms maximum.
2 hours in each of the 3 directions.
No damage, cracks, or parts dislocation.
No electrical discontinuity of 1µs or more
Acceleration of 490 m/s
2
, 11 ms duration,
6. Shock Contact resistance: 50m ohms maximum.
sine half-wave waveform, 3 cycles in each of the 3 axis.
No damage, cracks, or parts dislocation.
Contact resistance: 50m ohms maximum.
7.
Humidity(Steady state)
Insulation resistance: 50M ohms maximum.
96 hours at temperature of 40ç and humidity of 90% to 95%
No damage, cracks, or parts dislocation.
Contact resistance: 50m ohms maximum. 5 cycles under conditions as follows;
8. Temperature Cycle Insulation resistance: 50M ohms maximum. Temperature: -40
ç
/ 15 to 35
ç
/ 85
ç
/ 15 to 35
ç
,
No damage, cracks, or parts dislocation. Time: 30
/
5 max.
/
30
/
5 max.(minutes)
9.
Resistance
to
Soldering heat
No deformation of
Reflow: At the recommended temperature profile
components affecting performance.
Manual soldering: 350±5ç for 3 seconds
Item Specification Conditions