OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

5962-9325801MCA

P1-P3P4-P6P7-P9P10-P12
STANDARD
MICROCIRCUIT DRAWING
SIZE
A
5962-93258
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
REVISION LEVEL
J
SHEET
4
DSCC FORM 2234
APR 97
2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text
of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with
MIL-PRF-38535 as specified herein, or as modified in the device manufacturer's Quality Management (QM) plan. The
modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for
device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified
herein.
3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified
in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M.
3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein.
3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1.
3.2.3 Radiation exposure circuit. The radiation exposure circuit shall be maintained by the manufacturer under document
revision level control and shall be made available to the preparing and acquiring activity upon request.
3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the
electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full
ambient operating temperature range.
3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table IIA. The electrical
tests for each subgroup are defined in table I.
3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturer's PIN may also be
marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer
has the option of not marking the "5962-" on the device. For RHA product using this option, the RHA designator shall still be
marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be
in accordance with MIL-PRF-38535, appendix A.
3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a "QML" or "Q" as required in
MIL-PRF-38535. The compliance mark for device class M shall be a "C" as required in MIL-PRF-38535, appendix A.
3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535
listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of
compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see
6.6.2 herein). The certificate of compliance submitted to DLA Land and Maritime-VA prior to listing as an approved source of
supply for this drawing shall affirm that the manufacturer's product meets, for device classes Q and V, the requirements of
MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein.
3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for
device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing.
3.8 Notification of change for device class M. For device class M, notification to DLA Land and Maritime-VA of change of
product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing.
3.9 Verification and review for device class M. For device class M, DLA Land and Maritime, DLA Land and Maritime’s agent,
and the acquiring activity retain the option to review the manufacturer's facility and applicable required documentation. Offshore
documentation shall be made available onshore at the option of the reviewer.
3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in
microcircuit group number 49 (see MIL-PRF-38535, appendix A).
STANDARD
MICROCIRCUIT DRAWING
SIZE
A
5962-93258
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
REVISION LEVEL
J
SHEET
5
DSCC FORM 2234
APR 97
TABLE I. Electrical performance characteristics.
Test
Symbol
Conditions 1/ 2/
-55C T
A
+125C
unless otherwise specified
Group A
subgroups
Device
type
Limits 3/
Unit
Min Max
Input offset voltage
V
IO
V
CC
= 5 V
1 01 0.5 mV
2, 3 1.0
V
CC
= 15 V
1 0.5
2, 3 1.0
M,D,P,L,R 1 1.5
Input offset current
I
IO
V
CC
= 5 V, V
CM
= 0 V
1 01 100 nA
2, 3 150
V
CC
= 15 V, V
CM
= 0 V
1 100
2, 3 150
M,D,P,L,R 1 300
Input bias current
I
IB
V
CC
= 5 V, V
CM
= 0 V
1 01 600 nA
2, 3 700
V
CC
= 15 V, V
CM
= 0 V
1 600
2, 3 700
M,D,P,L,R 1 2000
Common mode rejection
ratio
CMRR
V
CC
= 5 V, 4/
V
CM
= 2 V
1, 2, 3 01 76 dB
V
CC
= 15 V, 4/
V
CM
= 12 V
80
Large signal voltage gain
A
VO
V
CC
= 5 V, R
L
= 2 k 4/
4 01 80 dB
5, 6 74
V
CC
= 15 V, R
L
= 2 k
4 83
5, 6 77.5
M,D,P,L,R 4 63
Output voltage swing
V
OUT
V
CC
= 5 V, R
L
= 2 k 4/
4, 5, 6 01
3.0
V
V
CC
= 15 V, R
L
= 2 k
4
13
5, 6
12.9
See footnotes at end of table.
STANDARD
MICROCIRCUIT DRAWING
SIZE
A
5962-93258
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
REVISION LEVEL
J
SHEET
6
DSCC FORM 2234
APR 97
TABLE I. Electrical performance characteristics - Continued
Test
Symbol
Conditions 1/ 2/
-55C T
A
+125C
unless otherwise specified
Group A
subgroups
Device
type
Limits 3/
Unit
Min Max
Supply current
I
CC
V
CC
= 5 V, V
OUT
= 0 V
1 01 10 mA
2, 3 12
V
CC
= 15 V, V
OUT
= 0 V
1 10
2, 3 13
M,D,P,L,R 1 11
Power supply rejection ratio
PSRR
V
CC
= 4.5 V to 5.5 V 4/
1 01 92 dB
2, 3 83
V
CC
= 4.5 V to 18 V 4/
1 96
2, 3 86
Input offset voltage drift
TC
VIO
V
CC
= 15 V, 4/
T
A
= +125C, -55C
8 01 5
V/C
Gain bandwidth product
GBWP
V
CC
= 5 V, A
V
= +1, 4/
C
L
= 30 pF, T
A
= +25C
7 01 16 MHz
V
CC
= 15 V, A
V
= +1, 4/
C
L
= 30 pF, T
A
= +25C
21
Slew rate
SR
V
CC
= 5 V, 4/
V
IN
= 5 V step,
A
V
= +1, R
L
= 2 k,
C
L
= 30 pF, T
A
= +25C
7 01 85
V/s
V
CC
= 15 V, A
V
= +1, 4/
V
IN
= 10 V step, R
L
= 2 k,
C
L
= 30 pF, T
A
= +25C
125
Settling time
t
S
V
CC
= 15 V, A
V
= +1, 4/
V
IN
= 10 V step to 0.01%
of the final value,
T
A
= +25C
9 01 300 ns
1/ RHA devices supplied to this drawing will meet all levels M, D, P, L, R of irradiation. However, this device is only tested at
the ‘R’ level. Pre and Post irradiation values are identical unless otherwise specified in table I. When performing post
irradiation electrical measurements for any RHA level, T
A
= +25C.
2/ These parts may be dose rate sensitive in a space environment and may demonstrate enhanced low dose rate effects.
Radiation end point limits for the noted parameters are guaranteed only for the conditions specified in MIL-STD-883,
method 1019, condition A.
3/ The limiting terms “min” (minimum) and “max” (maximum) shall be considered to apply to magnitudes only.
Negative current shall be defined as conventional current flow out of a device terminal.
4/ This parameter is not tested post-irradiation.
P1-P3P4-P6P7-P9P10-P12

5962-9325801MCA

Mfr. #:
Buy 5962-9325801MCA
Manufacturer:
Analog Devices Inc.
Description:
High Speed Operational Amplifiers QUAD LO NOISE HI Spd IC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet