ISL54500
12
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications
at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by
Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any
infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any
patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN6549.2
November 9, 2009
For additional products, see www.intersil.com/product_tree
SOT-23 Package Family
e1
N
A
D
E
4
321
E1
0.15 DC
2X
0.20 C
2X
e
B
0.20
M
DC A-B
b
NX
6
2 3
5
SEATING
PLANE
0.10 C
NX
1 3
C
D
0.15 A-BC
2X
A2
A1
H
c
(L1)
L
0.25
0°
+3°
-0°
GAUGE
PLANE
A
MDP0038
SOT-23 PACKAGE FAMILY
SYMBOL
MILLIMETERS
TOLERANCESOT23-5 SOT23-6
A 1.45 1.45 MAX
A1 0.10 0.10 ±0.05
A2 1.14 1.14 ±0.15
b 0.40 0.40 ±0.05
c 0.14 0.14 ±0.06
D 2.90 2.90 Basic
E 2.80 2.80 Basic
E1 1.60 1.60 Basic
e 0.95 0.95 Basic
e1 1.90 1.90 Basic
L 0.45 0.45 ±0.10
L1 0.60 0.60 Reference
N 5 6 Reference
Rev. F 2/07
NOTES:
15. Plastic or metal protrusions of 0.25mm maximum per side are not
included.
16. Plastic interlead protrusions of 0.25mm maximum per side are not
included.
17. This dimension is measured at Datum Plane “H”.
18. Dimensioning and tolerancing per ASME Y14.5M-1994.
19. Index area - Pin #1 I.D. will be located within the indicated zone
(SOT23-6 only).
20. SOT23-5 version has no center lead (shown as a dashed line).
ISL54500
