General Description
The MAX6715A–MAX6729A/MAX6797A are ultra-low-volt-
age microprocessor (µP) supervisory circuits designed to
monitor two or three system power-supply voltages. These
devices assert a system reset if any monitored supply falls
below its factory-trimmed or adjustable threshold and main-
tain reset for a minimum timeout period after all supplies rise
above their thresholds. The integrated dual/triple supervisory
circuits significantly improve system reliability and reduce
size compared to separate ICs or discrete components.
These devices monitor primary supply voltages (V
CC
1)
from 1.8V to 5.0V and secondary supply voltages (V
CC
2)
from 0.9V to 3.3V with factory-trimmed reset threshold
voltage options (see the
Reset Voltage Threshold Suffix
Guide
). An externally adjustable RSTIN input option
allows customers to monitor a third supply voltage down
to 0.62V. These devices are guaranteed to be in the cor-
rect reset output logic state when either V
CC
1 or V
CC
2
remains greater than 0.8V.
A variety of push-pull or open-drain reset outputs along
with watchdog input, manual-reset input, and power-fail
input/output features are available (see the
Selector
Guide
). Select reset timeout periods from 1.1ms to
1120ms (min) (see the
Reset Timeout Period Suffix
Guide
). The MAX6715A–MAX6729A/MAX6797A are avail-
able in small 5-, 6-, and 8-pin SOT23 packages and oper-
ate over the -40°C to +125°C temperature range.
Applications
Features
o V
CC
1 (Primary Supply) Reset Threshold Voltages
from 1.58V to 4.63V
o V
CC
2 (Secondary Supply) Reset Threshold
Voltages from 0.79V to 3.08V
o Externally Adjustable RSTIN Threshold for
Auxiliary/Triple-Voltage Monitoring
(0.62V Internal Reference)
o Watchdog Timer Option
35s (min) Long Startup Period
1.12s (min) Normal Timeout Period
o Manual-Reset Input Option
o Power-Fail Input/Power-Fail Output Option
(Push-Pull and Open-Drain Active-Low)
o Guaranteed Reset Valid Down to V
CC
1 or
V
CC
2 = 0.8V
o Reset Output Logic Options
o Immune to Short V
CC
Transients
o Low Supply Current 14µA (typ) at 3.6V
o Watchdog Disable Feature
o Small 5-, 6-, and 8-Pin SOT23 Packages
MAX6715A–MAX6729A/MAX6797A
Dual/Triple, Ultra-Low-Voltage, SOT23 µP
Supervisory Circuits
________________________________________________________________
Maxim Integrated Products
1
Ordering Information
Note: The first “_ _” are placeholders for the threshold voltage
levels of the devices. Desired threshold levels are set by the part
number suffix found in the Reset Voltage Threshold Suffix Guide.
The “_” after the D is a placeholder for the reset timeout delay
time. Desired delay time is set using the timeout period suffix
found in the Reset Timeout Period Suffix Guide. For example, the
MAX6716AUTLTD3-T is a dual-voltage supervisor V
TH
1 =
4.625V, V
TH
2 = 3.075V, and 210ms (typ) timeout period.
Ordering Information continued at end of data sheet.
+
Denotes a lead-free/RoHS-compliant package.
T = Tape and reel.
Multivoltage Systems
Telecom/Networking
Equipment
Computers/Servers
Portable/Battery-
Operated Equipment
Industrial Equipment
Printers/Fax Machines
Set-Top Boxes