TJA1028 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 4 — 25 July 2012 10 of 24
NXP Semiconductors
TJA1028
LIN transceiver with integrated voltage regulator
[3] ESD performance of pins LIN and V
BAT
according to IEC 61000-4-2 (150 pF, 330 ) has been verified by an external test house.
[4] Machine Model (MM): according to AEC-Q100-003 (200 pF, 0.75 H, 10 ).
[5] Charged Device Model (CDM): according to AEC-Q100-011 (field induced charge; 4 pF).
[6] Verified by an external test house to ensure pins can withstand ISO 7637 part 2 automotive transient test pulses 1, 2a, 3a and 3b.
[7] Junction temperature in accordance with IEC 60747-1. An alternative definition is: T
j
=T
amb
+P R
th(j-a)
, where R
th(j-a)
is a fixed value.
The rating for T
vj
limits the allowable combinations of power dissipation (P) and ambient temperature (T
amb
).
9. Thermal characteristics
[1] According to JEDEC JESD51-2 and JESD51-3 at natural convection on 1s board.
[2] According to JEDEC JESD51-2, JESD51-5 and JESD51-7 at natural convection on 2s2p board. Board with two inner copper layers
(thickness: 35 m) and thermal via array under the package connected to the first inner copper layer.
[3] According to JEDEC JESD51-2, JESD51-5 and JESD51-7 at natural convection on 2s2p board. Board with two inner copper layers
(thickness: 35 m) and thermal via array under the exposed pad connected to the first inner copper layer.
10. Static characteristics
Table 5. Thermal characteristics
Symbol Parameter Conditions Typ Unit
R
th(j-a)
thermal resistance from junction to ambient SO8; single-layer board
[1]
132 K/W
SO8; four-layer board
[2]
93 K/W
HVSON8; single-layer board
[1]
129 K/W
HVSON8; four-layer board
[3]
67 K/W
Table 6. Static characteristics
V
BAT
= 5.5 V to 28 V; T
vj
=
40
C to +150
C; R
L(LIN-VBAT)
= 500
; all voltages are defined with respect to ground; positive
currents flow into the IC; typical values are given at V
BAT
= 12 V; unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Supply; pin V
BAT
I
BAT
battery supply current Standby mode; V
LIN
=V
BAT
-4559A
Sleep mode; V
LIN
=V
BAT
-1218A
Normal mode; bus recessive;
V
LIN
=V
BAT
; V
RXD
=V
CC
; V
RSTN
=HIGH
- 850 1800 A
Normal mode; bus dominant;
V
BAT
=12V; V
TXD
=0V; V
RSTN
=HIGH
-2.04.5mA
V
th(det)pon
power-on detection threshold
voltage
- - 5.25 V
V
th(det)poff
power-off detection threshold
voltage
3-4.2V
V
hys(det)pon
power-on detection hysteresis
voltage
V
BAT
= 2 V to 28 V 50 - - mV
Supply; pin V
CC
V
CC
supply voltage V
CC(nom)
= 5 V; I
VCC
= 70 mA to 0 mA 4.9 5 5.1 V
V
CC(nom)
= 3.3 V; V
BAT
= 4.5 V to 28 V;
I
VCC
= 70 mA to 0 mA
3.234 3.3 3.366 V
I
Olim
output current limit V
CC
= 0 V to 5.5 V 250 - 70 mA