OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

BFC233610333

P1-P3P4-P6P7-P9P10-P11
MKP336 1 X1
www.vishay.com
Vishay BCcomponents
Not Recommended for New Designs, Use MKP338 1 X1
Revision: 21-Sep-16
4
Document Number: 28117
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging information”.
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches 15 mm capacitors shall be mechanically fixed by the leads
• For longer pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed Circuit Board
The maximum length and width of film capacitors is shown in Figure:
• Eccentricity as in figure. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned
• Product height with seating plane as given by “IEC 60717” as reference: h
max.
h + 0.3 mm
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
T
stg
= -25 °C to +35 °C with RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
APPROVALS
SAFETY APPROVALS X1 VOLTAGE VALUE FILE NUMBERS LINKS
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-4 (2013))
275 V
AC
10 nF to 1 µF FI 2016036 www.vishay.com/doc?28197
UL 60384-14 275 V
AC
10 nF to 1 µF E354331
www.vishay.com/doc?28188
CSA E384-14 275 V
AC
10 nF to 1 µF E354331
CB-Test-Certificate 275 V
AC
10 nF to 1 µF FI 9217 www.vishay.com/doc?28198
The ENEC-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the
ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom.
CBA11
6
Eccentricity
l
max.
= I + 0.3 mm
b
max.
= b + 0.3 mm
MKP336 1 X1
www.vishay.com
Vishay BCcomponents
Not Recommended for New Designs, Use MKP338 1 X1
Revision: 21-Sep-16
5
Document Number: 28117
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHARACTERISTICS
Capacitance
Impedance
Tangent of loss angle
Resonant frequency
Max. RMS voltage and AC current (sinewave)
typical
- 50
ΔC/C
(%)
2
- 2
- 4
- 6
0
050
100
T
amb
(°C)
4
max.
min.
Impedance
(Ω)
10
3
10
1
10
-2
10
0
f (Hz)
10
6
10
4
10
5
10
7
10
8
10
-1
10 nF
47 nF
100 nF
470 nF
1000 nF
4.7 nF
1 nF
10
1
10
1
10
2
10
3
10
0
10
2
10
3
10
4
10
5
f (Hz)
Dissipation
factor (x 10
-4
)
C = 1 µF
220 nF < C < 1 µF
47 nF < C ≤ 220 nF
10 nF < C
≤ 47 nF
C
≤ 10 nF
C (nF)
1 10 100 1000
10 000
f (MHz)
10
2
10
1
10
0
10
-1
X1
T
amb
≤ 105 °C
AC voltage
(V)
10
3
10
2
10
1
f (Hz)
10
1
10
2
10
3
10
4
10
5
470 nF
100 nF
47 nF
10 nF
1000 nF
1 nF
4.7 nF
AC current
(mA)
10
4
10
2
10
0
10
1
f (Hz)
10
1
10
2
10
3
10
4
10
5
10
-1
T
amb
≤ 100 °C
MKP336 1 X1
www.vishay.com
Vishay BCcomponents
Not Recommended for New Designs, Use MKP338 1 X1
Revision: 21-Sep-16
6
Document Number: 28117
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Capacitance
APPLICATION NOTES
• For X2 electromagnetic interference suppression in standard across the line applications (50 Hz/60 Hz) with a maximum mains
voltage of 310 V
AC
.
• For series impedance applications we refer to application note www.vishay.com/doc?28153
• For capacitors connected in parallel, normally the proof voltage and possibly te rated voltage must be reduced. For
information depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com
• These capacitors are not intended for continuous pulse application. For these situations capacitors of the AC and pulse
programs must be used.
• The maximum ambient temperature must not exceed 110 °C. (125 °C for less than 1000 h) for C 470 nF and 110 °C for
C > 470 nF.
• Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 V
DC
and
divided by the applied voltage.
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication
IEC 60384-14 ed-4 (2013) and Specific Reference Data.”
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER
AND TEST
D
OR
ND
CONDITIONS PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
D
4.1 Dimensions (detail) As specified in chapters “General Data” of
this specification
Initial measurements Capacitance
Tangent of loss angle:
For C 470 nF at 100 kHz
For C > 470 nF at 10 kHz
4.3 Robustness of terminations Tensile: load 10 N; 10 s
Bending: load 5 N; 4 x 90°
No visible damage
10
6
10
5
10
4
0
20 40 60
80
100
T
amb
(°C)
RC (s)
P1-P3P4-P6P7-P9P10-P11

BFC233610333

Mfr. #:
Buy BFC233610333
Manufacturer:
Vishay
Description:
Film Capacitors .033uF 20% 275volts
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet