VI-JN0-IX-F4

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Rev. 2.7 Page 1 of 5
Set your site on VICOR at vicorpower.com
Product Highlights
The VI-J00 MiniMod family established a new standard in component-level DC-DC converters.
This “junior” size complement to the higher power VI-200 family offers up to 100 W of isolated
and regulated power in a board mounted package. With thousands of input/output/power
combinations, and with a maximum operating temperature rating of 100˚C, the MiniMod
provides nearly unlimited flexibiliy for power system designers to meet demanding time to
market requirements.
Utilizing Vicor’s “zero-current-switching” forward converter technology, proven by an installed
base of over 8 million units, the MiniMod family combines state of the art power density with
the efficiency, low noise and reliability required by next generation power systems.
Features
RoHS compliant (VE versions)
Up to 50 Watts per cubic inch
cULus, cTÜVus
CE Marked
Up to 90% efficiency
Size: 2.28" x 2.4" x 0.5"
(57,9 x 61,0 x 12,7)
Remote sense and current limit
Logic disable
Wide range output adjust
ZCS power architecture
Low noise FM control
Isolated output
Data Sheet
VI-J00, VE-J00
Half Brick
DC-DC Converters
25 to 100 Watts
Low Line
Voltage
75%
Transient
[a]
Vin
2 3.3 5 5.2 5.5 5.8 6.5 7.5 10 12 13.8 15 18.5 24 28 36 40 48 52 72 85 95
Nom. (Range)
Max Power
Designators
ZY 0XWVTRM1P2N3L JK4 HFDB
12 (10-20) n/a 22 0 XXYYYYYYXXXXXXXXXXXXXX
24 (10-36) n/a n/a V --YYYYYYYYYYYYYYYYY--------
24 (21-32) 18 36 1 WWWWWWX X WWWWWWWWWWWWWW
24 (18-36) n/a n/a W WWWWWWX X WWWWWWWWWWWWWW
36 (21-56) 18 60 2 YYYYYYYYXXXXXXXXXXX------
48 (42-60) 36 72 3 WWWWWWX X WWWWWWWWWWWWWW
48 (36-76) n/a n/a N WW X X X X X XWWWWWWWWWWWWWW
72 (55-100) 45 110 4 WWWWWWX X WWWWWWWWWWWWWW
110 (66-160) n/a n/a T WW X X X XX XWWWWWWWWWWWW-- --
150 (100-200) 85 215 5 WWWWWWX X WWWWWWWWWWWWWW
150 (100-375) n/a n/a 7 YYYYYYYYXXXXXXXXXXX------
300 (200-400) 170 425 6 WWWWWWX X WWWWWWWWWWWWWW
VI J 6 1 C W
Family Series Input Output Grade Power
VI = Non-RoHS J =J00 0 = 12 V N =48V Z =2V M =10V K =40V E = –10 to 100°C 5 V <5
VE = RoHS V = 24 V 4 =72V Y =3.3V 1 =12V 4 =48V C = –25 to 100°C W = 100 W W = 20 A
1 =24V T = 110 V 0 =5V P = 13.8 V H =52V I = 40 to 100°C X = 75 W X = 15 A
W =24V 5 = 150 V X =5.2V 2 =15V F =72V M = –55 to 100°C Y = 50 W Y = 10 A
2 =36V 6 = 300 V W =5.5V N = 18.5 V D =85V Z = 25 W Z =5 A
3 =48V 7 = 150/300 V V =5.8V 3 =24V B =95V
T =6.5V L =28V
R =7.5V J
=36V
Part Numbering
[a]
Transient voltage for 1 second.
Vout Designators
Output
Input
Maximum Power Available for VI-Jxx-xx
Note: For additional
packaging options,
please see page 4.
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Rev. 2.7 Page 2 of 5
Set your site on VICOR at vicorpower.com
CONVERTER SPECIFICATIONS
(typical at T
BP
= 25°C, nominal line and 75% load, unless otherwise specified)
VI-J00 E-Grade VI-J00 C-, I-, M-Grade
Parameter Min Typ Max Min Typ Max Units Test Conditions
Inrush charge 60x 10
-6
60x 10
-6
100 x 10
-6
Coulombs Nominal line
Input reflected
10% 10% I
IN
Nominal line, full load
ripple current – pp
Input ripple rejection
dB 120 Hz, nominal line
dB 2400 Hz, nominal line
No load power dissipation 1.35 2 1.35 2 Watts
25+20 Log
(
Vin
)
Vout
30+20 Log
(
Vin
)
Vout
20+20 Log
(
Vin
)
Vout
VI-J00 E-Grade VI-J00 C-, I-, M-Grade
Parameter Min Typ Max Min Typ Max Units Test Conditions
Setpoint accuracy 1% 2% 0.5% 1% VNOM
Load/line regulation
0.5% 0.05% 0.2% V
NOM LL to HL, 10% to Full Load
1% 0.2% 0.5% V
NOM
LL to HL, No Load to 10%
Output temperature drift 0.02 0.01 0.02 % / °C Over rated temperature
Long term drift 0.02 0.02 %/1K hours
Output ripple – pp:
2 V, 3.3 V 200 100 150 mV 20 MHz bandwidth
5 V 5% 2% 3% VNOM 20 MHz bandwidth
10 – 95 V 3% 0.75% 1.5% VNOM 20 MHz bandwidth
Tr i m range
[a]
50% 110% 50% 110% VNOM
To t al remote
0.5 0.5 Volts 0.25 V max. neg. leg
sense compensation
Current limit 105% 135% 105% 125% Ifull load Automatic restart
Short circuit current 105% 140% 105% 130% I
full load Automatic restart
VI-J00 E-Grade VI-J00 C-, I-, M-Grade
Parameter Min Typ Max Min Typ Max Units Test Conditions
Gate out impedance 50 50 Ohms
Gate in impedance 1000 1000 Ohms
Gate in high threshold 6 6 Volts Use open collector
Gate in low threshold 0.65 0.65 Volts
Gate in low current 6 6 mA
[a]
10 V, 12 V, 13.8 V, 15 V outputs, or “V” input range have standard trim range ±10%. Consult factory for wider trim range.
95 V output –50 + 0% trim range.
INPUT SPECIFICATIONS
OUTPUT CHARACTERISTICS
CONTROL PIN SPECIFICATIONS
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 VI-J00 MiniMod DC-DC Converters 25 to 100 Watts Rev. 2.7 Page 3 of 5
Set your site on VICOR at vicorpower.com
CONVERTER SPECIFICATIONS
(typical at T
BP
= 25°C, nominal line and 75% load, unless otherwise specified)
VI-J00 E-Grade VI-J00 C-, I-, M-Grade
Parameter Min Typ Max Min Typ Max Units Test Conditions
Input to output 3,000 3,000 VRMS Baseplate earthed
Output to baseplate 500 500 VRMS
Input to baseplate 1,500 1,500 VRMS
VI-J00 E-Grade VI-J00 C-, I-, M-Grade
Parameter Min Typ Max Min Typ Max Units Test Conditions
Efficiency 78 – 88% 80 – 90%
Baseplate to sink 0.14 0.14 °C/Watt With Vicor P/N 20267
VI-J00 E-, C-Grade VI-J00 I-, M-Grade
Parameter Min Typ Max Min Typ Max Units Test Conditions
Weight
2.9 3.2 3.6 3.4 3.8 4.1 Ounces
82.8 92 101.2 96.3 107 117.7 Grams
DIELECTRIC WITHSTAND CHARACTERISTICS
THERMAL CHARACTERISTICS
MECHANICAL SPECIFICATIONS
Parameter Storage Operating Units Notes
E -20 to +105 -10 to + 100 °C
C -40 to +105 -25 to + 100 °C
I -55 to +105 -40 to + 100 °C
M -65 to +105 -55 to + 100 °C
PRODUCT GRADE TEMPERATURES

VI-JN0-IX-F4

Mfr. #:
Manufacturer:
Vicor
Description:
Isolated DC/DC Converters VI J00/200 - 48 Vin, 5 Vout, 75 W, I Product Grade
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union