SPECIFICATION CONTROL DRAWING
305 Constitution Drive
Menlo Park, CA 94025, USA
TITLE :
SOLDERPAK ASSEMBLY FOR AS-4000
2.54mm .100in CENTERS, SLEEVE D-128-0034
Unless otherwise specified dimensions are in millimeters.
Inches dimensions are in between brackets.
DOCUMENT NO.:
D-704-0049
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application.
: PROD. REV
A
DOC ISSUE
1
REV. DATE
17-Oct-02
PREPARED BY:
mforonda
DCR Number
D020472
Replaces
N/A
SCALE:
None
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
MATERIALS
1. SOLDERSLEEVE WIRE TERMINATOR: D-128-0034, Quantity Per Assembly: 500
2. CARRIER STRIP: Adhesive Coated High Temperature Tape
APPLICATION
1. This assembly is designed for used in conjunction with a Raychem AS-4000 Wire Organization
System on connectors with terminals on 2.54 (0.100) center spacing. For usage parameters, see
Raychem Devices Specification Control Drawing D-128-0034.
2. Wire terminators are to be inspected to Raychem Devices Specification Control Drawing D-128-0034.
