For price, delivery and to place orders: Analog Devices, Inc., 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 • Fax: 978-250-3373 • Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - BYPASS - SMT
6
HMC199AMS8 / 199AMS8E
v00.0814
DUAL SPDT SWITCH
DC - 2.5 GHz
Evaluation PCB
The circuit board used in the application should
be generated with proper RF circuit design
techniques. Signal lines at the RF ports should
have 50 ohm impedance. The evaluation circuit
board shown above is available from Hittite
Microwave Corporation upon request.
List of Materials for
Evaluation PCB EV1HMC199AMS8
[1]
*R1 & R2 = 100 Ohm.
These optional resistors will provide more RF path to control circuit isolation.
Item Description
J1 - J4 PCB Mount SMA RF Connector
J5 - J7 DC Pin
C1 - C4
Chip Capacitor, 0402 Pkg. Choose value for
lowest frequency of operation.
330 pF is provided on PCB.
R1 - R2 100 Ohm Resistor, 0402 Pkg.
U1 HMC199AMS8 / 199AMS8E Bypass Switch
PCB
[2]
103234 Evaluation PCB 1.5” x 1.5”
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
