Data subject to change without notice.
Miniature Audio Epoxy Potted
102 Series
PC Board Mount
Features
Output power models from 5 to 1,500 milliwatt level available.
P.C. board mount - square pin type (0.025" square typical) - see
mechanical information below for lengths.
Bifilar winding technique used on center tapped units for balanced resistive
and capacitive characteristics.
Rugged black epoxy potted construction produces a completely sealed unit
withstanding severe environmental conditions including those of MIL-T-27
(Grade 5, Class S).
For the more economical open type P.C. mount types please refer to the
148 and 149 series.
Peak working voltage rating of: 100V
Referring to figures 1-9, if connection is not used - no pin will exist.
Gallery
Part No.
Typical
Nominal Impedance Max. Primary D.C. Resistance Output Insertion Low Frequency
Drawing(Ohms) D.C. ma. (Ohms) +/- 15% Milliwatts Loss Roll Off
Applicaton Primary Secondary (*1) Primary Secondary (*2) db (*3) -1 db (Hz.) (*4) Figure
102B Input 50 1500 0 4 95 20 1.5 310 1
102D Input 600 1500 0 43 85 20 1.5 310 1
102H Interstage 2000 500 ct 5.6 341 62 20 1.5 310 2
102J Interstage 6000 2,000 ct 2.8 900 260 20 1.5 310 2
102K Interstage 10000 2,000 ct 2.5 1585 260 20 1.5 310 2
