OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

QS32XVH2245Q2G8

P1-P3P4-P6P7-P8
4
INDUSTRIAL TEMPERATURE RANGE
IDTQS32XVH2245
2.5V / 3.3V 16-BIT HIGH BANDWIDTH BUS SWITCH
TYPICAL I
CCD
vs ENABLE FREQUENCY CURVE AT V
CC
= 3.3V
ICCD (mA)
ENABLE FREQUENCY (MHz)
NOTES:
1. For conditions shown as Min. or Max., use the appropriate values specified under DC Electrical Characteristics.
2. Per input driven at the specified level. A and B pins do not contribute to ΔIcc.
3. This parameter is guaranteed but not tested.
4. This parameter represents the current required to switch internal capacitance at the specified frequency. The A and B inputs do not contribute to the Dynamic Power Supply
Current. This parameter is guaranteed but not production tested.
POWER SUPPLY CHARACTERISTICS
Symbol Parameter Test Conditions
(1)
Min. Typ. Max. Unit
ICCQ Quiescent Power Supply Current VCC = Max., VIN = GND or VCC, f = 0 — 4 8 mA
ΔICC Power Supply Current
(2,3)
per Input HIGH VCC = Max., VIN = 3V, f = 0 per Control Input — — 30 μA
ICCD Dynamic Power Supply Current per Output VCC = 3.3V, A and B Pins Open, Control Inputs See Typical ICCD vs Enable Frequency graph below
Enable Control Input
(4)
Toggling @ 50% Duty Cycle
0
2
4
6
8
10
12
0 2 4 6 8 10 12 14 16 18 20
5
INDUSTRIAL TEMPERATURE RANGE
IDTQS32XVH2245
2.5V / 3.3V 16-BIT HIGH BANDWIDTH BUS SWITCH
SWITCHING CHARACTERISTICS OVER OPERATING RANGE
TA = -40°C to +85°C
VCC = 2.5 ± 0.2V
(1)
VCC = 3.3 ± 0.3V
(1)
Symbol Parameter Min.
(4)
Max. Min.
(4)
Max. Unit
t
PLH Data Propagation Delay
(2,3)
⎯ 0.9 ⎯ 1.35 ns
tPHL Ax to/from Bx
t
PZL Switch Turn-On Delay 1.5 9 1.5 8 ns
tPZH OEx to Ax/Bx
t
PLZ Switch Turn-Off Delay 1.5 7.5 1.5 7.5 ns
tPHZ OEx to Ax/Bx
f
OEx Operating Frequency - Enable
(2,5)
⎯ 10 ⎯ 20 MHz
NOTES:
1. See Test Conditions under TEST CIRCUITS AND WAVEFORMS.
2. This parameter is guaranteed but not production tested.
3. The bus switch contributes no propagation delay other than the RC delay of the ON resistance of the switch and the load capacitance. The time constant for the switch alone
is of the order of 1.35ns at C
L = 50pF. Since this time constant is much smaller than the rise and fall times of typical driving signals, it adds very little propagation delay to the
system. Propagation delay of the bus switch, when used in a system, is determined by the driving circuit on the driving side of the switch and its interaction with the load on
the driven side.
4. Minimums are guaranteed but not production tested.
5. Maximum toggle frequency for OEx control input (pass voltage > V
CC, VIN = 5V, RLOAD ≥ 1MΩ, no CLOAD).
6
INDUSTRIAL TEMPERATURE RANGE
IDTQS32XVH2245
2.5V / 3.3V 16-BIT HIGH BANDWIDTH BUS SWITCH
CHARGE PUMP
OE
Vcc = 3.3V
0 to +5V
NFET
+6.5V
DRIVER
0 to +5V
SINGLE HOT
SWITCH
CARD I/O
ON CARD
LOGIC
CONNECTOR
QS3VHXXX
CPU
RAM
BUS
CARD I/O
ON CARD
LOGIC
CONNECTOR
QS3VHXXX
PLUGGABLE CARD/ LIVE SYSTEM
ZERO DOWN TIME SYSTEM
Rail-to-Rail Switching
SOME APPLICATIONS FOR HOTSWITCH PRODUCTS
Hot-Swapping
P1-P3P4-P6P7-P8

QS32XVH2245Q2G8

Mfr. #:
Buy QS32XVH2245Q2G8
Manufacturer:
IDT
Description:
Digital Bus Switch ICs 3.3V 16-BIT BUS SWITCH HOT SWAP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet