Ordering Information Default Frequency and VCXO Pull Range Order Information for Ceramic 5x7 Devices
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document,
including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not
guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the
suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any
license under intellectual property rights of IDT or any third parties.
IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to signifi-
cantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third
party owners.
Copyright 2014. All rights reserved.
6024 Silver Creek Valley Road
San Jose, California 95138
Sales
800-345-7015 (inside USA)
+408-284-8200 (outside USA)
Fax: 408-284-2775
www.IDT.com/go/contactIDT
Technical Support
netcom@idt.com
+480-763-2056
We’ve Got Your Timing Solution
Table 5. Default Frequency Ordering Information for f
XTAL
= 100.000MHz,
Non-Changeable XO Configurations
Code (dddd) Default Frequencies (MHz)
Single Frequency
Devices
Dual Frequency Devices
FSEL = 0 FSEL = 1
Quad Frequency Devices
FSEL[1:0] = 00 FSEL[1:0] = 01 FSEL[1:0] = 10 FSEL[1:0] = 11
101L 625 312.5 156.25 125
102L 106.25 212.5 75 150
105L 100 125 150 156.25
203L 622.08 155.52 644.5313 669.3266
204L 156.25 161.1328125 187.5 155.52
