Capacitors with screw terminals 螺钉式电容器
螺钉式电容器 螺钉式电容器
螺钉式电容器
B43740,B43760
Extra long useful life -
--
- 105ºC 超长使用寿命型
超长使用寿命型 超长使用寿命型
超长使用寿命型 -
--
- 105ºC
Ripple current capability
耐纹波电流能力
耐纹波电流能力耐纹波电流能力
耐纹波电流能力
Dimensional drawings
尺寸图
尺寸图尺寸图
尺寸图
B43740 B43760
Ring clip/clamp mounting Threaded stud mounting
卡环或卡夹安装 底部螺栓安装
M5: Min. reach of screw = 9.5 mm
M5: 螺纹最小深度 = 9.5 mm
9 mm for low inductance design
低感抗设计 = 9 mm
M6: Min. reach of screw = 12 mm
M6: 螺纹最小深度 = 12 mm
9.5 mm for low inductance design
低感抗设计 = 9.5 mm
Positive pole marking: +
正极标志: +
The can is insulated with one sleeve layer.
铝壳以单层套管绝缘。
Due to the ripple current capability of the contact elements, the following current upper limits must not be
exceed:
因为接触元件的耐纹波电流能力限制，工作电流不得超过下表的极限值
Capacitor diameter
电容器直径
51.6mm 64.3mm 76.9mm 91.0mm
I
AC,max
34A 45A 57A 80A
The base of types with threaded stud and d = 91 mm is fully insulated (the lengths l and l
1
are increased by
0.5mm in these cases). For types with threaded stud and d ≤ 76mm the base is not insulated. For non-
insulated and insulated mounting instructions and accessories, refer to chapter " Screw terminals -
accessaries."
带底部螺栓，且d = 91 mm型号底部完全绝缘（这些产品的高度l和l
1
都增加0.5mm）。带底部螺栓，且d≤
76mm型号的底部不绝缘。关于非绝缘安装及绝缘安装说明及附件，参阅章节“螺钉式电容器 - 附件”。
Page 4 of 10
