8/10/04
Page 4 of 17
© 2004 Fairchild Semiconductor Corporation
LVTTL/LVCMOS COMPATIBLE LOW INPUT
CURRENT HIGH GAIN SPLIT DARLINGTON
OPTOCOUPLERS
SINGLE CHANNEL: FOD070L FOD270L
DUAL CHANNEL: FOD073L
** All typicals at T
A
= 25°C
1. Current Transfer Ratio is defined as a ratio of output collector current, I
O
, to the forward LED input current, I
F
, times 100%.
2. Pin 7 open. (FOD070L and FOD270L only)
3. Common mode transient immunity in logic high level is the maximum tolerable (positive) dV
CM
/dt on the leading edge of the
common mode pulse signal, V
CM
, to assure that the output will remain in a logic high state (i.e., V
O
>2.0 V). Common mode
transient immunity in logic low level is the maximum tolerable (negative) dV
CM
/dt on the trailing edge of the common mode
pulse signal, V
CM
, to assure that the output will remain in a logic low state (i.e., V
O
<0.8 V).
4. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together.
5. For dual channel devices, CI-O is measured by shorting pins 1 and 2 or pins 3 and 4 together and pins 5 through 8 shorted
together.
6. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
ISOLATION CHARACTERISTICS (T
A
= 0 to 70°C Unless otherwise specified)
Characteristics Test Conditions Symbol Device Min Typ** Max Unit
Input-output
insulation leakage current
(Relative humidity = 45%)
(T
A
= 25°C, t = 5 s)
(V
I-O
= 3000 VDC)
(Note 4)
I
I-O
ALL 1.0 µA
Withstand insulation
test voltage
(R
H
≤ 50%, T
A
= 25°C)
(Note 4) ( t = 1 min.)
V
ISO
FOD070L
FOD073L
2500
V
RMS
FOD270L 5000
Resistance (input to output) (Note 4) (V
I-O
= 500 VDC) R
I-O
ALL 10
12
Ω
Capacitance (input to output) (Note 4,5) (f = 1 MHz) C
I-O
ALL 0.7 pF
Input-Input
Insulation leakage current
(RH ≤ 45%, V
I-I
= 500 VDC (Note 6) I
I-I
FOD073L 0.005 µA
Input-Input Resistance (V
I-I
= 500 VDC) (Note 6) R
I-I
FOD073L 10
11
Ω
Input-Input Capacitance (f = 1 MHz) (Note 6) C
I-I
FOD073L 0.03 pF
NOTES