CPC44055ST Datasheet CPC44055ST | P7-P8

NTEGRATED

IRCUITS

IVISION

7 www.ixysic.com R02

CPC44055ST

5 Manufacturing Information

5.1 Moisture Sensitivity

All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated

Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the

latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product

evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee

proper operation of our devices when handled according to the limitations and information in that standard as well as

to any limitations set forth in the information or standards referenced below.

Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced

product performance, reduction of operable life, and/or reduction of overall reliability.

This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to

the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.

5.2 ESD Sensitivity

This product is ESD Sensitive, and should be handled according to the industry standard

JESD-625.

5.3 Soldering Profile

This product has a maximum body temperature and time rating as shown below. All other guidelines of

J-STD-020 must be observed.

NOTE: The exposed surface of the DCB substrate is not to be soldered.

5.4 Board Wash

IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to

remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an

optical waveguide in many of its optically isolated products, the use of a short drying bake may be necessary if a wash

is used after solder reflow processes. Chlorine-based or Fluorine-based solvents or fluxes should not be used.

Cleaning methods that employ ultrasonic energy should not be used.

Device Moisture Sensitivity Level (MSL) Rating

CPC44055ST MSL 1

Device Maximum Temperature x Time

CPC44055ST 245°C for 30 seconds

NTEGRATED

IRCUITS

IVISION

R02 www.ixysic.com 8

CPC44055ST

5.5 Mechanical Dimensions

BOTTOM

9.169±0.127

(0.361±0.005)

2.540±0.127

(0.100±0.005)

38.100±0.254

(1.500±0.010)

17.780±0.254

(0.700±0.010)

2.540±0.254

(0.100±0.010)

(4x)

3.810±0.127

(0.150±0.005)

6.350±0.127

(0.250±0.005)

3.807±0.076

(0.150±0.003)

0.635±0.025

(0.025±0.001)

1.397±0.127

(0.055±0.005)

13.005±0.254

(0.512±0.010)

2.997±0.254

(0.118±0.010)

10.160±0.127

(0.400±0.005)

12.700±0.127

(0.500±0.005)

5.080±0.127

(0.200±0.005)

35.544±0.254

(1.360±0.010)

1.778±0.254

(0.070±0.010)

1.016±0.076

(0.040±0.003)

(4x)

Hole Size 1.45 mm (0.057 in) x4

Pin 1

RECOMMENDED HOLE PATTERN

DIMENSIONS

millimeters

(inches)

TOP

Pin tolerances are non-cumulative

DCB Substrate

NOTE: Not

to be soldered

For additional information please visit our website at: www.ixysic.com

IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make

changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated

Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its

products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other

applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe

property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.

Specification: DS-CPC44055ST-R02

3/9/2015

P1-P3 P4-P6 P7-P8

CPC44055ST

Mfr. #:

Buy CPC44055ST

Manufacturer:

IXYS Integrated Circuits

Description:

Solid State Relays - PCB Mount Voltage Controlled AC Power Switch

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

CPC44055ST