Accessories
www.vishay.com
Vishay BCcomponents
Revision: 01-Dec-17
4
Document Number: 28348
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CLAMPS FOR SL-VERSIONS, Ø D = 25 mm, 30 mm, 35 mm, and 40 mm
To facilitate vertical mounting, a series of rigid clamps made of zinc plated steel is available. These are made of zinc
plated steel, chromium (III) passivated.
The clamps have two mounting lugs, may be easily slipped over the capacitor and then clamped with a nut and bolt.
Four types of clamps are available, one for each case diameter.
They are delivered without nuts or bolts.
To avoid damaging the insulation sleeve, do not overtighten the clamp screw.
DIMENSIONS in millimeters
Fig. 9 - Dimensional outline of clamp
for case Ø D = 25 mm, 30 mm and 40 mm
Fig. 10 - Dimensional outline of clamp
for case Ø D = 35 mm
Table 3
1.0
3
e
b
a
c
10
d
7
Ø 4.0 ± 0.2
4.3
30°
1
+ 0.2
0
13.5
10
0
- 0.5
Ø 4.5 ± 0.1
12
± 0.5
63
35
51.5 ± 0.2
12 ± 0.5
6 ± 1
1
35°
23.5
10
4.5
MOUNTING CLAMPS FOR SOLDER LUGS
CASE DIAMETER
(mm)
a
(mm)
b
(mm)
c
(mm)
d
(mm)
e
(mm)
ORDERING CODE
25 41.5 ± 0.2 25 35 18.5 56 MAL804324011E3
30 46.5 ± 0.2 30 40 21 61 MAL804324021E3
35 51.5 ± 0.2 35 - 23.5 63 MAL804324031E3
40 56.5 ± 0.2 40 50 26 71 MAL804324041E3
