Page 4 SPECIFICATION RW-3032 ISSUE 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
TABLE 1
Tubing Dimensions
Dimensions
-
inches (mm)
Size
Minimum
As Supplied I.D.
Maximum
Recovered I.D.
Nominal
Recovered Wall
With Adhesive
Nominal Recovered
Adhesive Thickness
1/8
.125 (3.17) .062 (1.57)
.027 (0.68) .009 (0.23)
3/16
.187 (4.74)
.093 (2.36) .028 (0.71) .010 (0.25)
1/4 .250 (6.35) .125 (3.17) .029 (0.74) .005 (0.13)
3/8 .375 (9.50) .187 (4.74) .029 (0.74) .005 (0.13)
1/2 .500 (12.7) .250 (6.35) .030 (0.76) .006 (0.15)
3/4 .750 (19.05) .375 (9.50) .035 (0.89) .006 (0.15)
1 1.00 (25.40) .500 (12.7) .042 (1.06) .008 (0.20)
1-1/2 1.50 (38.10) .750 (19.05) .047 (1.20) .011 (0.28)
2 2.00 (50.80) 1.000 (25.40) .065 (1.65) .022 (0.56)
3 3.00 (76.20) 1.500 (38.10) .065 (1.65) .022 (0.56)
4 4.00 (101.60) 2.000 (50.80) .070 (1.78) .020 (0.51)
TABLE 2
Mandrel Dimensions for Bend Testing
Tubing Size Mandrel Diameter
in.
mm.
1/8” to ¼” inclusive 5/16 7.9
3/8” to ¾” inclusive 1/2 12.7
1” to 4 “ 9/16 14.3