Can we make Micro-MaTch Value-line connectors with contacts
in Gold plating?
No. The Micro-MaTch contact system is designed to deliver
a high normal-force as required for tinplated contact
interconnections. This pressure is too high for gold plated
interconnections, where much lower normal-forces are
required.
We have noticed that the kinks of the Micro-MaTch Value-line
thru-hole solder contacts on Top Entry Connectors, start with
random direction. Is this technically OK?
Yes, this is OK and does not aect contact retention. For those
connectors the kink direction in each row can start random,
but sequential contacts within each row have kinks pointing in
opposite directions.
Which flat ribbon cable is suitable for Micro-MaTch Value-line
Male-on-Wire and Paddle-Board connectors and why?
The new design of the cable connectors within TE’s Micro-
MaTch Value-line will perfectly accept most Flat Ribbon Cable
with ‘oval’ conductor design. The cable insulation’s oval shape
at each position and the flat transition between the positions,
both exactly match with corresponding shape in the cover. This
enables accurate pre-positioning of the conductors regarding
to the IDC-slots during the termination process.
It is also Important that the conductor’s pitch is within
tolerance and that they are symmetrically positioned in the
insulation shape.
Are Micro-MaTch Value-line Male-on-Wire and Paddle-Board
connectors also suitable for discrete wire termination?
No. For discrete wires, Micro-MaTch connectors oer the
Crimp-On Snap-In (COSI) connectors in 2 wire ranges.
Only available in the standard (Industrial) version.
Is there retention force performance available for the female
connector version with locking latches?
No. The plastic latches were not designed to retain the
connectors but to produce an audible click when the
connectors are fully mated.
What exactly are the main dierences between the Value-line
and the actual (Industrial) Micro-MaTchversion?
The actual Micro-MaTchversion has a higher operating
temperature, more mating cycles, and more vibration
resistance.The Value-line is perfect for applications that are
not exposed to heavy vibration, operate within a standard
temperature range between -30C and +80C and are less
prone to frequent matingcycles. For more information please
contact your local TE Connectivity Sales representative.
AUTOMATION & CONTROL /// QUICK REFERENCE GUIDE
Let’s connect
We make it easy to connect with our experts and are ready to provide all the support you need. Just call your local support number
or visit www.te.com/industrial to chat with a Product Information Specialist.
Technical Support
te.com/support-center
For more Information
te.com/products/micromatch
te.com
© 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 1-1773840-5 IND WR 11/2014
MICRO-MATCH, TE Connectivity and the TE connectivity (logo) are trademarks of the TE Connectivity Ltd. family of companies. Other logos, product and Company names mentioned herein may
be trademarks of their respective owners. While TE has made every reasonable eort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does
TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness
for a particular purpose. The dimensions in this brochure are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for
the latest dimensions and design specifications.
FREQUENTLY ASKED QUESTIONS
