BRR.3S.200.PZSN Datasheet BRR.3S.200.PZSN, BRR.1S.200.PZSN, BRR.0S.200.PZSGY | P1-P3

ProductUpdate#122B–BRRDustCapProductChanges‐Consolidation11/12/13

Page1of3



BRR Dust Cap Product Changes – Consolidated Version

SummaryofChanges(Detailedinformationbelow):



1) Plastic components made from PSU rather than POM (announced in Product

Update #122 on May 15, 2013)

2) NEW in this announcement- Material of gasket made from FKM (Viton®) rather than

MVQ (Silicone) – (see information in Item #1 Material Changes section below)

3) NEW Thread locker recommendations (announced in Product update #122A on

October 28, 2013)

4) New part numbers (announced in Product update #122A although additional

information has been added in Item #3 below)

5) New colors available (announced in Product update #122A)



1&2)MaterialChanges:

To improve the quality on the BRR dust cap products, LEMO has changed the dust cap

materials from POM (Polyoxymethylene) to PSU (Polysulfone) for the plastic

components, and MVQ (Silicone) to FKM (Viton®) for the gasket material. These

material changes improve the adhesion of the gasket and seals the connector properly

during unmating cycles. All series of the BRR dust cap products including: 0S, 1S, 2S,

3S, and 3K are implemented with this material change.



LEMO USA, Inc.

635 Park Court

P.O. Box 2408

Rohnert Park, CA 94927-2408

Main (707) 578-8811

Toll Free (800) 444-5366

Fax (707) 578-0869

Email info@lemousa.com

Number: #122B

By: LEMO SA

Date: November 14, 2013

www.LEMO.com

ProductUpdate#122B–BRRDustCapProductChanges‐Consolidation11/12/13

Page2of3



3)ThreadlockerRecommendations

With this PSU material change it is critical that the correct thread locker and thread

sealants are used as listed below:

A) Thread lockers such as Loctite® 242 (or equivalent) are not compatible with the PSU

cap material

B) The following removable thread lockers or thread sealants are recommended for use on

the receptacle threads:

Removable Thread lockers

 ND Industries Vibra-Tite® VC6 (LEMO USA part# VTVC-6 CLEAR)

 ThreeBond 1401

PTFE based Thread sealants (reduced break-away torque)

 Permatex® Thread Sealant with PTFE (80633)

 LOCTITE® w/PTFE™



4) OldandNewPartNumbers:

Please note the new part numbers have a PZV_ suffix …

Series Old Part Number New Part Number

0S, 0B

BRR.0S.200.PZS_

BRR.0S.200.PZV_

1S,1B,1D

BRR.1S.200.PZS_

BRR.1S.200.PZV_

2S, 2B, 2C, 2G

BRR.2S.200.PZS_

BRR.2S.200.PZV_

3S, 3B

BRR.3S.200.PZS_

BRR.3S.200.PZV_

5) ColorOptions

Replace the _ at the end of the part number above with the color code below:



G=Gray

N=Black

B=White

A=Blue

NewPartNumberExample:

BRR.0S.200.PZVG for Gray PSU color

ProductUpdate#122B–BRRDustCapProductChanges‐Consolidation11/12/13

Page3of3





EffectiveDate:

Immediately

Note: This is a consolidated version of previous Product Updates #122 and #122A.

If you have any questions or concerns regarding this change, please contact Customer

Service or Applications Engineering at 1-800-444-5366 or email: info@lemousa.com

Thank you for your continued support of LEMO products!

BRR.3S.200.PZSN

BRR.3S.200.PZSN

Products related to this Datasheet