SMM0207
www.vishay.com
Vishay Draloric
Revision: 04-Dec-15
1
Document Number: 20005
For technical questions, contact: melf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Thin Film MELF Resistors
SMM 0207 thin film MELF resistors are the perfect choice
for most fields of modern professional electronics where
reliability and stability is of major concern at higher power
rating and higher operating voltage. The typical applications
in the fields of automotive, industrial and medical equipment
reflect the outstanding level of proven reliability.
FEATURES
• MELF resistor with high power rating
• AEC-Q200 qualified
• Advanced metal film technology
• Best in class pulse load capability
• Intrinsic sulfur resistance
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• Automotive
• Telecommunication
• Industrial
• Medical equipment
Note
(1)
Please refer to APPLICATION INFORMATION below.
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime
TECHNICAL SPECIFICATIONS
DESCRIPTION SMM0207
DIN size 0207
Metric size code RC6123M
Resistance range 0.16 to 10 M
Resistance tolerance ± 5 %; ± 1 %; ± 0.5 %; ± 0.25 %; ± 0.1 %
Temperature coefficient ± 100 ppm/K; ± 50 ppm/K; ± 25 ppm/; ± 15 ppm/K
Rated dissipation P
70
(1)
1.0 W
Operating voltage, U
max.
AC
RMS
/DC 350 V
Permissible film temperature,
F max.
(1)
155 °C
Operating temperature range
(1)
-55 °C to 155 °C
Permissible voltage against ambient (insulation):
1 min; U
ins
500 V
Failure rate: FIT
observed
0.1 x 10
-9
/h
Zero-Ohm-Resistor: OMM0207 R
max.
= 10 m; I
max.
= 5 A