For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved.
AV02-0976EN - May 10, 2010
Convective IR Reflow Soldering
For more information on soldering,
refer to Application Note 1060,
Surface Mounting SMT LED Indicator
Components.
Storage Condition: 5 to 30°C @ 60%
RH max.
Baking is required under the
condition:
a) Humidity Indicator Card is >10%
when read at 23 ± 5°C
b) Device exposed to factory condi-
tions <30°C/60% RH more than
672 hours.
Baking recommended condition:
60 ± 5°C for 20 hours.
Figure 17. Tape leader and trailer dimensions.
END START
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT POCKETS
SEALED WITH COVER
TAPE.
MINIMUM OF
230 mm
(9.05 INCH)
MAY CONSIST
OF CARRIER
AND/OR
COVER TAPE.