CXA-0406

■ Features
CXA-0406
CXA-0406 Specifications
Please refer to each specification before use
■ Applications
Dimming/Connector Type
2-output
●UL60950 approved
●Applicable panel size*: 5 to 6 inches
With brightness control function (Pulse Wide Modulation mode).
●With shut down function.
With a sensing function for running out of lamp (alarm output).
●In the high-voltage generator(a terminal and a pattern),
an anti-dust measure by silicone application is taken.
(Notice) Applicable panel size becomes a standard.
Electrical Characteristics
Item Unit Symbol
Specifi cation Condition
min typ max Vin(V) Vrmt(V) Vbr(V) Ta(℃ ) RL(kΩ ) Remark
Output Current mArms
Iout
(Maximum dimmer)
5.8 6.4 7.0 50.05 5 0 235 55 (*1)
5.7 6.4 7.1 50.25 5 0
-10 to +60
55 (*1)
Iout
(Minimum dimmer)
2.7 3.2 3.7 50.05 5 3 235 55 (*1)
Input Current
A Iin1 - 1.28 1.75 50.25 5 0
-10 to +60
55
Remote ON
mA Iin2 - 0 1 50.25 0
-10 to +60
55
Remote OFF
Frequency
kHz Freq1 53 59 65 50.25 5 0
-10 to +60
55
Hz
Freq2 (Duty frequency)
230 255 280 50.25 5 3
-10 to +60
55
Open Circuit Voltage
Vrms Vopen 1050 1150 - 4.75min. 5 0
-10 to +60
Open load
Alarm Signal V Vst
4.5 5.0 5.5 50.25 5 0
-10 to +60
In case of lamp anomaly (*2)
-00.550.2550
-10 to +60
55
On a normal operation (*2)
(*1) Please refer to the connection diagram for details of a dimming method.
(*2) Please refer to the connection diagram for details of alarm output.
Other Specifications
Dimming Function
Yes
Operating Temperature
-10 to +70
Storage Temperature
-30 to +85
Operating Humidity Ratio
RH% 95Max
Safety Standard
UL60950
Weight g 20
Dimensions(WxDxH)
mm 105x25x8.5 (*3)
Fused Input Yes
Remote ON OFF
Yes
Alarm Signal Function
Yes
Shutdown Function
Yes
Silicone Coating on
High Voltage Area
Yes
(*3) These dimensions are indicated the maximum only H. Others are typical
values.
This means that, in conformity with EU Directive
2002/95/EC, lead, cadmium, mercury, hexavalent
chromium, and specific bromine-based flame
retardants, PBB and PBDE, have not been used,
except for exempted applications.
Conformity to RoHs Directive
001-01/20080228/etl_cxa_0406
All specifications are subject to change without notice.
1
Outline Drawing
CXA-0406
Example of label marking
Product name, Lot No., Country of origin,
TDK-Lambda logotype, UL standard marking
Silicone
High-voltage generator ※
(The entire surface within a range of 58mm away from the end of the basein)
※From high-voltage generator, please secure space distance more than 2mm in top and bottom right and left.
Remarks
UL94V-0 t=1.0
Molex Inc.
JST Mfg. Co., Ltd.
Recommended applicable connector
51021-0700
BHR-03VS-1
Connector
Connector
number
Part number
Printed circuit board PCB
Input connector CN1
Output connector CN2,CN3
Model/Material
Composite(CEM-3)
53261-0771
SM02(8.0)B-BHS-1-TB(LF)(SN)
Quantity
1
1
2
Dimmer terminal
0V or 0
Ω
:m a x
3V or 10k
Ω
:mi n
VbrCN1-7
0 to 3V
0 to 10k Ω
CN1-5
CN1-6
Terminal Numbers And Functions
Input side CN1
Terminal
number
Symbol Rated voltage Remarks
CN1-1
CN1-2
CN1-3
CN1-4
Vin
GND
Vrmt
50.25V
0V
2.5 to Vin/0 to 0.5V
0V/5V
Remote terminal
2.5 to Vin:ON
Power input
Vst(Output)
Alarm output Lump open5V
Ground
(2V)
Rated voltage
340Vrms
Output side CN2
CN2-2
N.C.
CN2-3
V
LOW
1
Terminal
number
Symbol
CN2-1
V
HIGH
1
(2V)
Rated voltage
340Vrms
Output side CN3
CN2-2
N.C.
CN2-3
V
LOW
2
Terminal
number
Symbol
CN2-1
V
HIGH
2
N.C.
Output 1 return
Remarks
Output 1
N.C.
Output 2 return
Remarks
Output 2
unit:mm
・All specifications are subject to change without notice.
2
Connections
2.5V∼Vin
Maximum brightness
CXA-0406
RL:Load resistance(7W minimum)
SW Unit operation
aOperation
b Does not operate
Operate as follows by switching a SW.
・All specifications are subject to change without notice.
3

CXA-0406

Mfr. #:
Manufacturer:
TDK
Description:
Backlighting Components EL/CCFL Inverters & Accessories 5Vin Dual Output Dimming/Connecto
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet