UG-054 Evaluation Board User Guide
Rev. 0 | Page 8 of 8
Evaluation boards are only intended for device evaluation and not for production purposes. Evaluation boards are supplied “as is” and without warranties of any kind, express,
implied, or statutory including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. No license is granted by implication or otherwise under
any patents or other intellectual property by application or use of evaluation boards. Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Analog Devices reserves the
right to change devices or specifications at any time without notice. Trademarks and registered trademarks are the property of their respective owners. Evaluation boards are not
authorized to be used in life support devices or systems.
©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG08518-0-1/10(0)
ORDERING INFORMATION
BILL OF MATERIALS
Table 2.
Reference Designator Description Manufacturer Part No.
C2, C4 Capacitor, MLCC, 1 μF, 16 V, 0603, X5R Murata (or equivalent) GRM188R61C105KA93
J1 Jumper, single, STR, two pins Sullins Connector Solutions PEC02SAAN
U1 IC, LDO regulator Analog Devices, Inc.
ADP150ACBZ-3.3-R7 (WLCSP)
ADP150AUJZ-3.3-R7 (TSOT)
ESD CAUTION