Light Touch Switches/EVPAW
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
180
260
MAX.
150
230
90±30 40±10
(Normal Temp.)
Operation Top (°C)
Soldering Time (s)
Fan or Normal Temp.
Tape width=12.0 mm
Taping condition : Lack of products in the middle of taping should be
one MAX, but total quantity specified in the
specifications should be secured.
Peeling off strength of top tape : It should be within 0.2N to 1. ON at
165 degree in peeling off angle.
Joint of carrier tape : One joint per one reel may exist.
fG
D
Feeding hole
K
C
F
A
H
E
I
B
J
t
Chip pocket
Tape running direction
G
FA
B
E
C
D
● Embossed Carrier Tap ing
■ Recommended Re ow Soldering Conditions
Unit: mm
● Standard Reel Dimensions in mm (not to scale)
Part No.HeightABCDEFGH I JK t
EVPAW 0.6 12.0±0.3 1.75±0.10 5.5±0.1
8.0±0.1 4.0±0.1 2.0±0.1 1.5±0.3 3.8±0.2 2.3±0.2 0.75±0.20 (10.25) 0.3
+0.15
Item A B C D E
Rate (mm)
0
380.0±2.0
0
80.0±1.0
0
13.0±0.5
0
21.0±1.0 2.0±0.5
Item F G
Rate (mm)
13.5±1.0 17.5±1.0
–0.10
✽
Refl ow temperature may vary by location even in the same refl ow condition.
Please check the refl ow temperature at terminals and at the top of a switch
to make sure the both temperatures are withiin the specifi cation.
If even one of them is out of the specifi cations, please adjust.
Apr. 201502
