For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago Technologies and the A logo are trademarks of Avago Technologies in the United
States and other countries. All other brand and product names may be trademarks of their
respective companies.
Data subject to change. Copyright © 2015 Avago Technologies. All Rights Reserved.
pub-005213 – November 18, 2015
POF termination procedure
To ensure good termination of simplex and duplex POF
jacketed cables please complete the following steps.
Step 1: Ensure the correct aperture is used for the fiber being
cut. Lift the blade and insert fiber into the aperture until
approximately 10mm protrudes from the other side.
Step 2: Gently push down the blade until the fiber is fully cut.
Step 3: Remove the POF fiber and inspect POF end surface for
damage. Repeat steps 2 and 3 if necessary.
POF termination surface examples
1mm POF simplex fiber with 2.2mm jacket diameter
1mm POF Duplex fiber with 2.2mm jacket diameter
Ordering information
One bag contains 10 simple POF cutters
Simplex POF Cable Duplex POF Cable
Simplex POF Cable Duplex POF Cable
Simplex POF Cable Duplex POF Cable