https://www.phoenixcontact.com/us/products/2701877
10/21/2015Page2/5
Router-FL MGUARD RS4004 TX/DTX VPN-2701877
Technical data
Interfaces
No. of ports 6 (RJ45 ports)
Connection method RJ45
Transmission physics Ethernet in RJ45 twisted pair
Transmission speed 10/100 MBit/s
Transmission length 100 m (per segment)
Signal LEDs Supply voltage, data transmission, error, link, activity
Interface 2 Signal contact
Connection method Plug-in/screw connection via COMBICON
Interface 3 VPN - release button
Connection method 24 V DC/250 mA can be connected as an option
Function
Basic functions
Router with intelligent firewall, integrated 4-port managed switch and
VPN for 10 tunnels (opt. up to 250 with additional license), CIFSIntegrity
Monitoring (opt.), metal housing, slot for SD memory card, extended
temperature range, high-performance firewall/VPN:up to 124 Mbps/40
Mbps
Supported browsers HTTPS support required
Processor 330 MHz
Status and diagnostic indicators LEDs:P1, P2, Fault, State, Error, LAN, WAN
Signal contact control voltage 24 V DC (typical)
Signal contact control current 250 mA (short-circuit resistant)
Security functions
Dynamic Host Configuration Protocol (DHCP) support Server or Relay Agent
Network Time Protocol (NTP) client Client
Link Layer Discovery Protocol (LLDP) As per protocol 802.2
Remote Syslog Logging On externals server
Virtual private network (VPN) throughput max. 42 Mbps (Router)
max. 27 Mbps (Stealth mode, VPN bidirectional throughput)
Number of VPN tunnels 10 (up to 250 tunnels with additional license as an option)
Encryption methods DES, 3DES, AES-128, -192, -256
Internet Protocol Security (IPsec) mode ESP tunnel / ESP transport
Authentication X.509v3 certificates with RSA or PSK
Data integrity MD5, SHA-1
1:1 Network Address Translation (NAT) in the VPN Supported
Firewall data throughput
max. 130 Mbps (Router mode, default firewall rules, bidirectional
throughput)
max. 61 Mbps (Stealth mode, default firewall rules, bidirectional
throughput)