4
T-1
3
/
4
(5 mm) Precision Optical Performance AlInGaP II Led Lamps (Continued)
Selection Guide
Typical Viewing
Angle
2q
1
/
2
(Deg.)
[2]
Color and
Dominant
Wavelength
(nm), Typ.
[1]
Lamps Without Standos
(Outline Drawing A)
Lamps With Standos
(Outline Drawing B)
Luminous
Intensity Iv (mcd)
[3,4,5]
@ I(f) = 20 mA
Min. Max.
30° Amber 592 HLMP-EL31-P0000 880 –
HLMP-EL31-QT000 HLMP-EL33-QT000 1150 3200
HLMP-EL31-QTR00 1150 3200
HLMP-EL31-SV000 HLMP-EL33-SV000 1900 5500
HLMP-EL31-SVK00 1900 5500
HLMP-EL31-SVR00 HLMP-EL33-SVR00 1900 5500
HLMP-EL31-STR00 1900 3200
HLMP-EL31-SUK00 1900 4200
HLMP-EL31-SUS00 1900 4200
HLMP-EL31-SUR00 1900 4200
HLMP-EL31-SVK00 1900 5500
HLMP-EL31-SVS00 1900 5500
Red-Orange 617 HLMP-EH31-QT000 1150 3200
HLMP-EH33-RU000 1500 4200
HLMP-EH31-SV000 HLMP-EH33-SV000 1900 5500
Red 630 HLMP-ED31-Q0000 HLMP-ED33-Q0000 1150 –
HLMP-ED31-QTT00 1150 3200
HLMP-ED31-ST000 1900 3200
HLMP-ED31-SUT00 1900 4200
HLMP-ED31-RU000 1500 4200
HLMP-ED31-RUT00 HLMP-ED33-RUT00 1500 4200
HLMP-ED31-SV000 HLMP-ED33-SV000 1900 5500
HLMP-ED31-SVT00 HLMP-ED33-SVT00 1900 5500
Notes:
1. Dominant Wavelength, λ
d
, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.
2. q
1/2
is the o-axis angle where the luminous intensity is one half the on-axis intensity.
3. The luminous intensity is measured on the mechanical axis of the lamp package.
4. The optical axis is closely aligned with the package mechanical axis.
5. Tolerance for each intensity bin limit is ± 15%.