NOTES:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS].
SEE CH00-0250-008 FOR ORDERING INFORMATION, MODIFICATIONS, AND ADDITIONAL
DIMENSIONS FOR MODIFICATIONS. MODIFICATIONS INDICATED BY TXR_ _M OR ANY OF
THE FOLLOWING LETTERS AT THE END OF THE PART NUMBER H J L P T S N OR V.
SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING.
TEMPERATURE RANGE FOR ALUMINUM ALLOY:
ADAPTER TO BE PERMANENTLY MARKED WITH ASSEMBLY PN LESS RING DESIGNATOR
(EG: TXR76AB00-1208) AND CODE IDENT. NO. (06090).
CONSULT FACTORY FOR OPTIONAL ENTRIES, MATERIALS, MODIFICATIONS, FINISHES AND
BRAID DESIGNATORS.
INTERNAL EDGES SHALL BE ROUNDED.
FOR LARGER ENTRY SIZES, A 2 PIECE ADAPTER (TYPE II) IS SUPPLIED.
THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT
SHRINKABLE LIPPED BOOT TO A CONNECTOR.
RINGS SHALL BEAR NO MARKING.
ADAPTER MATES WITH BS 9522, N0001 PATT 603
BS 9522, F0017 PATT 105.
CODE 76 TINEL-LOCK ADAPTER
