S82Y-D60S Datasheet S82Y-DFAN, S82Y-D60A, S82Y-D30A | P1-P3

Switching Power Supply S82D

Switching Power Supply

S82D

High-Grade Power Supply for

Demanding Industrial Applications

D Wide range of output voltages: 5 V or 12 V.

D Selectable 85 to 132 VAC or

170 to 264 VAC input voltage.

D Equipped with overvoltage and overload protection,

remote sensing and remote control functions.

D Fan alarm signal warns of possible fan malfunction.

D For loads drawing high current, parallel connection of

two power supplies possible.

D Two pairs of output terminals simplify wiring of two

loads (300 W).

D Optional multiple output terminal available (600 W).

D 3-year warranty.

Ordering Information

J SWITCHING POWER SUPPLIES

Stock Note: Shaded models are normally stocked.

Rated input voltage

Power ratings

Output

Part number

Voltage Current

120/240VAC 300 W

5 VDC 60 A S82D-3005

12 VDC 27 A S82D-3012

600 W

5 VDC 120 A S82D-6005

12 VDC 53 A S82D-6012

Note: For mounting brackets and other accessories, refer to the Accessories Section on the next page.

J MODEL NUMBER LEGEND

1. Power ratings

30: 300 W

60: 600 W

S82D -

2. Output voltage

05: 5 V

12: 12 V

24: 24 V

Switching Power Supply S82D

J ACCESSORIES (ORDER SEPARATELY)

Stock Note: Shaded models are normally stocked.

Item

Mounting type Applicable power supply Part number

Mounting brackets Bottom mounting

S82D-30jj

S82Y-D30B

S82D-60jj

S82Y-D60B

Side mounting

S82D-30jj

S82Y-D30S

S82D-60jj

S82Y-D60S

Terminal expansion bracket

S82D-60jj

S82Y-D60T

Connection kit Parallel

S82D-30jj

S82Y-D30A

S82D-60jj

S82Y-D60A

Fan

S82D-30jj

S82Y-DFAN

S82D-60jj

Specifications

Power rating 300 W 600 W

Efficiency (typical) 74% to 84% (depending on types)

Life expectancy 10 yrs. min. (used at 40°C at the rated input with a 50% load)

The life expectancy of the fan is lower.

Input

Voltage (AC only) 120 V (85 to 132 V) or 240 V (170 to 264 V) selectable

Frequency 47 to 450 Hz

Current (with rated I/O)

100-V input 8 A max. 14 A max.

()

200-V input 4 A max. 7 A max.

Leakage current (with rated I/O)

100-V input 0.5 mA max.

g( )

200-V input 1 mA max.

Inrush current (with rated I/O)

100-V input 25 A typ. 30 A typ.

()

200-V input 50 A typ. 60 A typ.

Noise filter Yes

Output

Voltage fluctuation 3% max. (combined input, load, and temperature variations)

Voltage adjustment range ±10%, adjustable with variable resistor (V.ADJ)

Ripple 2% (p-p) max.

Input variation influence 0.4% max. (85 to 132 VAC/170 to 264 VAC input, 100% load)

Load variation influence 0.8% max. (rated input, 0% to 100% load)

Temperature variation influence 0.04%/°C max. (0° to 50°C, with rated input and output)

Rise time 300 ms max. (output voltage rise to 90%, with rated input and output)

Hold time 20 ms min.

Additional functions

Overload protection 120% of rated load current (typical), inverted L drop, automatic reset (output shut off

after 5 s, reset by input reset)

Overvoltage protection 120% of rated output voltage (typical), shut-off type, reset by input reset

Fan alarm Relay output, connector SPST, 250 VAC, 1 A load resistance, but switching capacity

is 125 VA

Remote sensing Yes

Remote control Yes

Parallel connection Yes

(This table continues on the next page.)

Switching Power Supply S82D

Specifications Table – continued from previous page

Power rating

300 W 600 W

Characteristics

Ambient temperature

Operating See the derating curve in the Engineering Data section

Storage –25°C to 85°C (–13°F to 185°F)

Ambient humidity

Operating 25% to 85%

Storage 25% to 95%

Dielectric strength (see note below table) 2000 VAC, 50/60Hz for 1 min (between all inputs and outputs/housing)

500 VDC for 1 min (between all inputs and outputs/housing)

Insulation resistance (see note below table) 100 MΩ min. at 500 VDC (between all outputs and inputs/housing)

Vibration resistance Malfunction: 10 to 55 Hz, 0.75-mm double amplitude (approx. 4.5G) each in X, Y,

and Z directions for 2 hours.

Shock resistance Malfunction: 294 m/s

(30G), 3 times each in ±1X, ±1Y, and ±1Z directions

Output indicator Yes (red)

Electromagnetic interference Meets FCC class A standards

Approved standards UL 1012, CSA E.B. 1402

Weight 2.5 kg max. 4 kg max.

Note: Be sure to remove short bar attached between FC and ACG terminals before performing dielectric strength test or insulation resis-

tance test because surge absorber is connected across input lines.

Engineering Data

J DERATING CURVE

Note: The derating curve differs depending on the mounting

position of the power supply. The curve above was ob-

tained with the power supply mounted in the standard

position.

Load (%)

Ambient temperature _C

J OVERVOLTAGE PROTECTION

The protective function prevents damage to the load and to the

power supply itself (from overvoltage). The output is shut off if the

output voltage rises above about 120% of the rated voltage. The

input power must be turned off for at least 30 s. Then, turn it on

again to reset the power supply.

Output voltage (V)

Overvoltage

Approx.

20%

10%

–10%

Rated output

voltage

Variable

P1-P3 P4-P6 P7-P9 P10-P12 P13-P13

S82Y-D60S

Mfr. #:

Buy S82Y-D60S

Manufacturer:

Description:

Switching Power Supplies S82D-600w SIDE BRACKET

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

S82Y-D60S

S82Y-D60S

Products related to this Datasheet