OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

FSOT3009E1K000KE

P1-P3
FSOT…XX Flat
www.vishay.com
Vishay Huntington
Revision: 20-Sep-16
1
Document Number: 30337
For technical questions, contact: ww2dresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Wirewound Resistors, Industrial Power, Flat
FEATURES
• High temperature silicon coating
• Mounting accommodations ideally suited to
high density packaging
• Self-stacking hardware for horizontal or vertical
placement
• Withstands high vibrations without loosening
• Mounting hardware functions as a heat sink
allowing greater heat dissipation and less
derating of stacked units
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
POWER RATING
P
25 °C
W
RESISTANCE
RANGE
RESISTANCE
RANGE
WEIGHT
(typical)
g
± 5 % ± 10 %
FSOT30…14 / FSOT30…16 HL-24-09 / HL-24-16
30
1.0 to 11K 0.10 to 11K
20.14
FSOT30…15 / FSOT30…17 NHL-24-09 / NHL-24-16 1.0 to 1.2K 1.0 to 1.2K
FSOT40…14 / FSOT40…16 HL-40-09 / HL-40-16
40
1.0 to 26K 0.10 to 26K
30.07
FSOT40…15 / FSOT40…17 NHL-40-09 / NHL-40-16 1.0 to 3K 1.0 to 3K
FSOT55…14 / FSOT55…16 HL-55-09 / HL-55-16
55
1.0 to 54K 0.10 to 54K
51.25
FSOT55…15 / FSOT55…17 NHL-55-09 / NHL-55-16 1.0 to 6.8K 1.0 to 6.8K
FSOT70…14 / FSOT70…16 HL-70-09 / HL-70-16
70
1.0 to 77K 0.10 to 77K
60.48
FSOT70…15 / FSOT70…17 NHL-70-09 / NHL-70-16 1.0 to 9.4K 1.0 to 9.4K
FSOT95…14 / FSOT95…16 HL-95-09 / HL-95-16
95
1.0 to 99.9K 0.10 to 99.9K
76.51
FSOT95…15 / FSOT95…17 NHL-95-09 / NHL-95-16 1.0 to12.4K 1.0 to 12.4K
TECHNICAL SPECIFICATIONS
PARAMETER UNIT FSOT…XX FLAT RESISTOR CHARACTERISTICS
Temperature Coefficient ppm/°C ± 90 for 0.1 to 0.99 ; ± 50 for 1 to 9.9 ; ± 30 for 10 and above
Dielectric Withstanding Voltage V
AC
1000, from terminal to mounting hardware
Short Time Overload - 10 x rated power for 5 s
Maximum Working Voltage V (P x R)
1/2
Insulation Resistance 1000 M minimum dry, 100 M minimum after moisture test
Operating Temperature Range °C -55 to +350
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: FSOT3009E10R00JE14
GLOBAL
MODEL
TERMINAL
DESIGNATION
TERMINAL
FINISH
RESISTANCE
VALUE
TOLERANCE PACKAGING CODE SPECIAL
FSOT30
(see “Standard
Electrical
Specifications”
table above for
additional P/N’s)
09
16
E = lead
(Pb)-free
R = decimal
K = thousand
10R00 = 10.0
1K000 = 1 k
J = ± 5.0 %
K = ± 10.0 %
E = lead (Pb)-free cell and
bulk pack
(dash number)
(up to 2 digits)
from 1 to 99
as applicable
14 = standard,
09 terminal
15 = non-inductive,
09 terminal
16 = standard,
16 terminal
17 = non-inductive,
16 terminal
SOT 30 0 9 E10R00JEF 1 4
FSOT…XX Flat
www.vishay.com
Vishay Huntington
Revision: 20-Sep-16
2
Document Number: 30337
For technical questions, contact: ww2dresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in inches [millimeters]
TYPE FSOT…XX FLAT STYLE
POWER RATING
Vishay FSOT flat resistor wattage ratings are based on
mounting horizontally to 10" x 10" x 0.04" [254.0 mm x
254.0 mm x 1.02 mm] steel plate in 25 °C ambient with no
air flow.
EXCLUSIVE BRACKET DESIGN
Mounting strap fits snugly through resistor core and is
bound against unit by two eccentric spacers. The bracket
eliminates expensive cements and improves heat transfer
and power handling capabilities.
MATERIAL SPECIFICATIONS
Element: copper-nickel alloy of nickel-chrome alloy,
depending on resistance value
Core: ceramic, steatite
Coating: special high temperature silicone
Standard Terminals: model “E” terminals are tinned steel
Terminal Bands: steel
Part Marking: HEI, model, wattage, value, tolerance, date
code
TERMINAL DIMENSIONS
TERMINAL FINISH
“E” Finish - 100 % Sn coated steel.
NON-INDUCTIVE
Models of equivalent physical and electrical specifications
are available with non-inductive (Aryton-Perry) winding. For
non-inductive models, maximum resistance values are
lower, see STANDARD ELECTRICAL SPECIFICATIONS
table.
DERATING
Derating is required for ambient temperatures above 25 °C
per the above graph.
MODEL
DIMENSIONS
in inches [millimeters]
A
± 0.063
[1.59]
B
± 0.063
[1.59]
C
± 0.031
[0.79]
DISTANCE
BETWEEN
TERMINALS
(ref.)
TERMINAL
DESIGNATION
STANDARD OPTIONAL
FSOT30
1.250
[31.75]
2.500
[63.50]
2.000
[50.80]
0.718
[18.24]
09E 16E
FSOT40
2.000
[50.80]
3.250
[82.55]
2.750
[69.85]
1.468
[37.29]
09E 16E
FSOT55
3.500
[88.90]
4.750
[120.65]
4.250
[107.95]
2.968
[75.39]
09E 16E
FSOT70
4.750
[120.65]
6.000
[152.40]
5.500
[139.70]
4.218
[107.14]
09E 16E
FSOT95
6.000
[152.40]
7.250
[184.15]
6.750
[171.45]
5.468
[138.89]
09E 16E
0.625 [15.88]
0.594 [15.08]
0.196 [4.98] Dia. typ.
A
B
C
0.563 ± 0.030
[14.29 ± 0.794]
0.438 ± 0.030
[11.11 ± 0.794]
0.313 [7.94] Dia.
1.188 [30.16]
max.
DIMENSION
DIMENSIONS in inches [millimeters]
STYLE 09 STYLE 16
A
0.188 0.188
[4.76] [4.76]
B
0.500 0.563
[12.70] [14.29]
C
0.104 0.050
[2.64] [1.27]
D
0.020 0.020
[0.51] [0.51]
Style 16
B
D
A
C
B
D
C
A
Style 09
- 65 - 50 0 50 150 250 350
AMBIENT TEMPERATURE IN
°C
120
100
80
60
40
20
0
% N I R E W O P D E T A R
25
PERFORMANCE
TEST CONDITIONS OF TEST TEST LIMITS
Thermal Shock Rated power applied until thermally stable,then a minimum of 15 min at -55 °C ± (2.0 % + 0.05 ) R
Short Time Overload 10x rated power for 5 s ± (2.0 % + 0.05 ) R
Dielectric Withstanding Voltage 1000 V
RMS
, 1 min ± (0.1 % + 0.05 ) R
Low Temperature Storage -55 °C for 24 h ± (2.0 % + 0.05 ) R
High Temperature Exposure 250 h at + 350 °C ± (2.0 % + 0.05 ) R
Moisture Resistance MIL-STD-202 Method 106, 7b not applicable ± (2.0 % + 0.05 ) R
Shock, Specified Pulse MIL-STD-202 Method 213, 100 g's for 6 ms, 10 shocks ± (0.2 % + 0.05) R
Vibration, High Frequency Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each ± (0.2 % + 0.05 ) R
Load Life 1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (3.0 % + 0.05 ) R
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
P1-P3

FSOT3009E1K000KE

Mfr. #:
Buy FSOT3009E1K000KE
Manufacturer:
Vishay
Description:
RES CHAS MNT 1K OHM 10% 30W
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet