Types: VE07/09 - VF05/07
Types: VE13/17 - VF10/14
Dimension Characteristics Value Tolerance
Sprocket holes pitch 12.7 (0.50) ±0.3 P
0
Distance between the sprocket
3.8 (.150) ±0.7 P
1
hole axe and the lead axe
Total thickness of tape 0.9 (.035) max t
Verticality of components 0 ±2 Dp
Alignment of components 0 ±2 Dh
Dimension Characteristics Value Tolerance
Leading tape width 18 (.709) +1/-0.5 W
The hold down tape shall
Adhesive tape width not protrude beyond the W
0
carrier tape
Sprocket hole position
9 (.354) +0.75/-0.5 W
1
Distance between the tops of
3 (.118) max W
2
the tape and the adhesive
Diameter of sprocket hole
4 (.157) ±0.2 D
0
Distance between the tape axis
and the bottom plane of
16/ (.630)/ ±0.5/ H
component body
or 18 (.709) -0/+2
Distance between the tape axis
16/ (.630)/ ±0.5/
H
0
and the kink
or 18 (.709) -0/+2
Distance between the tape axis
and the top of component body
VE 07/09 - VF 05/07 33.0 (1.30) max H
1
VE 13/17 - VF 10/14 45.0 (1.77) max
Lead diameter
0.6 0.8 +10%
d
(.024) (.031) -0.05
Protrusions beyond the lower
5 (.197) max I
2
side of the hold down tape
Lead spacing
5.08 7.62
±0.8 E
(0.20) (0.30)
Components pitch
12.7 25.4
±0.3 p
(0.50) (0.10)
DIMENSIONS: millimeters (inches) DIMENSIONS: millimeters (inches)