www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 93583
2 DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 02-Jul-10
VSKD600 Series
Vishay Semiconductors
Standard Diodes, 600 A
(SUPER MAGN-A-PAK Power Modules)
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current
at case temperature
I
F(AV)
180° conduction, half sine wave
600 A
100 °C
Maximum RMS forward current I
F(RMS)
180° conduction, half sine wave at T
C
= 100 °C 942 A
Maximum peak, one-cycle forward,
non-repetitive surge current
I
FSM
t = 10 ms
No voltage
reapplied
Sinusoidal half wave,
initial T
J
= T
J
maximum
19.0
kA
t = 8.3 ms 20.1
t = 10 ms
100 % V
RRM
reapplied
16.2
t = 8.3 ms 17.2
Maximum I
2
t for fusing I
2
t
t = 10 ms
No voltage
reapplied
1805
kA
2
s
t = 8.3 ms 1683
t = 10 ms
100 % V
RRM
reapplied
1319
t = 8.3 ms 1230
Maximum I
2
t for fusing I
2
t t = 0.1 ms to 10 ms, no voltage reapplied 18 050 kA
2
s
Low level value of threshold voltage V
F(TO)1
(16.7 % x x I
F(AV)
< I < x I
F(AV)
), T
J
= T
J
maximum 0.70
V
High level value of threshold voltage V
F(TO)2
(I > x I
F(AV)
), T
J
= T
J
maximum 0.77
Low level value of forward slope resistance r
f1
(16.7 % x x I
F(AV)
< I < x I
F(AV)
), T
J
= T
J
maximum 0.28
m
High level value of forward slope resistance r
f2
(I > x I
F(AV)
), T
J
= T
J
maximum 0.25
Maximum forward voltage drop V
FM
I
pk
= 1800 A, T
J
= 25 °C, t
p
= 10 ms sine pulse 1.45 V
BLOCKING
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
RMS insulation voltage V
INS
t = 1 s 3000 V
Maximum peak reverse and
off-state leakage current
I
RRM
T
J
= T
J
maximum, rated V
RRM
applied 50 mA
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction operating and storage
temperature range
T
J
, T
Stg
- 40 to 150 °C
Maximum thermal resistance,
junction to case per junction
R
thJC
DC operation 0.065
K/W
Maximum thermal resistance,
case to heatsink
R
thC-hs
0.02
Mounting torque
± 10 %
SMAP to heatsink
A mounting compound is recommended and the torque
should be rechecked after a period of 3 hours to allow
for the spread of the compound.
6 to 8
Nm
busbar to SMAP 12 to 15
Approximate weight 1500 g
Case style See dimensions - link at the end of datasheet SUPER MAGN-A-PAK
