Type 4X Polyester Wallmount Enclosure
PJW Series
Continuous Hinge Door with Twist Latches and 3 Pt Handle
Application
Designed for use as instrument enclosures, electric, hydraulic or
pneumatic control housings, electrical junction boxes or terminal wiring
enclosures.
Provides outstanding insulation and protection where equipment may be
hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive
environments.
Standards
UL/cUL 508 Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
NEMA Type 1, 2, 3, 4, 4X,12 and 13
IEC 60529, IP66
Construction
Molded fiberglass polyester enclosure with matching cover is easily
punched, cut, or drilled.
Enhanced UV inhibitors protect against outdoor weathering.
3/8 collar studs are provided for optional inner panel mounting, hardware
included.
Stainless steel butterfly type "twist latch" door fasteners with padlock
provision.
Captive oil resistant gasket provides a positive seal.
Integrated mounting flange.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in the Technical
Information section.
Finish
Fiberglass polyester material has a gray finish.
Optional inner panels are available in white powder coated finished steel.
Accessories
Quality Products. Service Excellence.