OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SLI-343DC3F

P1-P3P4-P6P7-P9P10-P10
　　　　
[Data Sheet]
■Rank Reference of Brightness*
*Measurement tolerance：±10%
[SLI-343x series]
Red (V)
(Ta=25ºC, I
F
＝20mA)
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
0.40〜0.63
0.63〜1.0
1.0〜1.6 1.6〜2.5 2.5〜4.0 4.0〜6.3
6.3〜10
10〜16 16〜25 25〜40 40〜63
63〜100
100〜160 160〜250 250〜400 400〜630
Orange (D)
(Ta=25ºC, I
F
＝20mA)
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
0.40〜0.63
0.63〜1.0
1.0〜1.6 1.6〜2.5 2.5〜4.0 4.0〜6.3
6.3〜10
10〜16 16〜25 25〜40 40〜63
63〜100
100〜160 160〜250 250〜400 400〜630
Yellow (Y)
(Ta=25ºC, I
F
＝20mA)
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
0.40〜0.63
0.63〜1.0
1.0〜1.6 1.6〜2.5 2.5〜4.0 4.0〜6.3
6.3〜10
10〜16 16〜25 25〜40 40〜63
63〜100
100〜160 160〜250 250〜400 400〜630
Yellowish Green (M)
(Ta=25ºC, I
F
＝20mA)
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
0.40〜0.63
0.63〜1.0
1.0〜1.6 1.6〜2.5 2.5〜4.0 4.0〜6.3
6.3〜10
10〜16 16〜25 25〜40 40〜63
63〜100
100〜160 160〜250 250〜400 400〜630
SLI-343MC
SLI-343MG
Iv (mcd)
Rank
Iv (mcd)
SLI-343URC
SLI-343UR
Rank
Iv (mcd)
Rank
Iv (mcd)
Rank
SLI-343DC
SLI-343DU
SLI-343YC
SLI-343YY
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
©2016 ROHM Co., Ltd. All rights reserved
4/8
2017.9 - Rev.004
　　　　
[Data Sheet]
■Part No. Construction
[SLI-343ｘ series]
*"-"will be taken out for emitting color Special Code will be applied for Chromaticity rank Rank sign
WB/B/E series. Emitting color WB/B/E series. (for white LED） (Brightness Rank)*
Series name Package type Emitting Color Resin Color Taping Specification
V R
U U
U2 Y
D G
Y C
Y2 RC
M T
P
E
B
*Concerning the Brightness rank.
WB
*Please refer to the rank chart above for
luminous intensity classification.
*Part name is individual for each rank.
*When shipped as sample,the part name will
be a representative part name.
General products are free of ranks.
Please contact sales if rank appointment
is needed.
White
Yellowish green
Transparent Coloreless
Green
Green
Blue
SLR 1-Die Circular Type LED Lamps Red
<Yellow>DiffusedColored
SLD
1-Die Oval Type High Brightness LED Lamps
Orange
<Yellowish green>DiffusedColored
Red
<Red>DiffusedColored
SLI
1-Die Circular Type Low Current High Brightness LED Lamps
Red
<Orange>DiffusedColored
Transparent Colored
4S L I － 3 3 Y C
Yellow
Yellow
SLA
1-Die Circular Type High Brightness LED Lamps
S
3F
T□□
T
1-Element straight bulk
See Taping specifications
23
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
©2016 ROHM Co., Ltd. All rights reserved
5/8
2017.9 - Rev.004
　　　　
[Data Sheet]
Visual light emitting diode does not contain reinforcement materials such as glass fillers.
Therefore if sudden thermal and mechanical shock are given, destruction or inferiority of luminous
intensity may occur. Please take care of the handling.
　(1) In case of soldering on PCB, If the operation is done with stress, it may cause non-lighting
　　failure during soldering or using. Please design the through-holes of PCB suitable for lead pins
　　space or lead pins space after forming to avoid the physical stress on resin.
　(2) Using spacer between LEDʼs body and PCB is recommended.
　　In case of direct mount on PCB(SLR/SLI-343 series), please take care about clinch of LED pins
　　to avoid the remained stress and solder heat stress.
　　
Enough evaluation is requested before deciding assembly and soldering conditions.
■ATTENTION POINTS IN HANDLING
■FIXATION METHOD
１．ATTENTION POINTS
　(1) Please do not give excessive heat over storage temperature to resin.
　　In case that the product has to be heated in oven for the glue fixing of surface mount parts,
[SLI-343x series]
Please consult with us if any problems in the evaluation stage.
　　this LED should be mounted after the glue fixing.
　(2) Please avoid stress to resin at high temperature.
２． TERMINATION PROCESSING
　(1) In case of termination processing, please fix the
　　termination
　(2) Processing position, and process the reverse side
　　of LED body.
　　If stress is given during processing, It may cause
　　non-lighting failure.
　(3) Please process before soldering.
３． ASSEMBLY ON PC BOARD
＜Good＞ ＜No good＞
To be fixed To be fixed
＜Good＞ ＜No good＞＜Good＞
＜2 lead pins type＞
＜3 lead pins type＞
Min.15°
Min.45°
Die bonding side
＜2 lead pin type＞
Min.15°
Min.45°
Die bonding side
Min.45
＜3 lead pin type＞
＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
www.rohm.com
©2016 ROHM Co., Ltd. All rights reserved
6/8
2017.9 - Rev.004
P1-P3P4-P6P7-P9P10-P10

SLI-343DC3F

Mfr. #:
Buy SLI-343DC3F
Manufacturer:
ROHM Semiconductor
Description:
Standard LEDs - Through Hole 3.1MM 611NM ORN TRANSP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet