OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

DG2523DN-T1-GE4

P1-P3P4-P6P7-P9P10-P10
DG2523, DG2524
www.vishay.com
Vishay Siliconix
S16-2128-Rev. A, 17-Oct-16
1
Document Number: 67894
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
0.4 , Low Resistance and Capacitance,
Dual DPDT / Quad SPDT Analog Switch
DESCRIPTION
The DG2523 and DG2524 are four-channel single-pole
double-throw (SPDT) analog switches. The DG2523 has two
control inputs that each controls a pair of single-pole
double-throw (SPDT). It is also known as a two-channel
double-pole double-throw (DPDT) configuration. The
DG2524 has an EN
pin to enable the device when the logic
is low.
The parts are designed to operate from 1.8 V to 5.5 V single
power rail. All switches conduct equally well in both
directions, offering rail to rail signal witching and can be
used both as multiplexers as well as de-multiplexers.
The parts feature low control logic threshold.
Break-before-make switching is guaranteed.
The DG2523 and DG2524 exhibit low parasitic capacitance,
low leakage, and highly matched low and flat switch
resistance over the full signal range characters that are
important for precision analog designs.
The high bandwidth and excellent total harmonic distortion
(THD) performance make them ideal for both analog and
digital signal switching in space constrain applications
requiring high performance and efficient use of board space.
The DG2523 and DG2524 come in Pb-free QFN-16 package
of 3 mm x 3 mm.
BENEFITS
• Low and flat resistance
• Excellent total harmonic distortion
• Low parasitic capacitance
• Low voltage control interface
FEATURES
• 1.8 V to 5.5 V single supply operation
• Low resistance: 0.4 / typ. at 2.7 V
• Highly flat and matched R
on
• Low parasitic capacitance,
C
on
= 26 pF, C
off
= 14.5 pF
• Typical switch off leakage of 40 pA
• High bandwidth: 310 MHz
• Guaranteed logic high 1.2 V, logic low 0.3 V
• Break before make switching
• Signal swing over V+ capable
• Power down protection
• Latch up current: 300 mA (JESD78)
•ESD/HBM: > 6 kV
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automatic test equipment
• Data acquisition systems
• Meters and instruments
• Medical and healthcare systems
• Communication systems
• Audio and video signal routing
• Battery powered systems
• Computer peripherals
• Data storage
• Relay replacement
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
IN1, IN2 NO4
COM2
NO2
NC3
IN3, IN4
NC1 COM4
1
2
3
12
11
10
49
56
8
16 15 14 13
NC2 GND NO3 COM3
COM1 NO1 V+ NC4
Top View
DG2523DN
QFN-16 (3 x 3)
7
IN NO4
COM2
NO2
NC3
EN
NC1 COM4
1
2
3
12
11
10
49
56
8
16 15 14 13
NC2 GND NO3 COM3
COM1 NO1 V+ NC4
Top View
DG2524DN
QFN-16 (3 x 3)
7
Control
DG2523, DG2524
www.vishay.com
Vishay Siliconix
S16-2128-Rev. A, 17-Oct-16
2
Document Number: 67894
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
a. Signals on NC, NO, or COM, or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC board.
c. Derate 17.3 mW/°C above 70 °C.
d. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead
terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip
cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
TRUTH TABLE DG2523
INx NC1, 2, 3, and 4 NO1, 2, 3, and 4
0OnOff
1OffOn
TRUTH TABLE DG2524
EN LOGIC IN NC1, 2, 3, and 4 NO1, 2, 3, and 4
1x Off Off
0 0 On Off
01 Off On
ORDERING INFORMATION
TEMPERATURE RANGE PACKAGE PART NUMBER MIN. ORDER / PACK. QUANTITY
-40 °C to +85 °C lead (Pb)-free QFN-16 (3 mm x 3 mm)
DG2523DN-T1-GE4
Tape and reel, 2500 units
DG2524DN-T1-GE4
ABSOLUTE MAXIMUM RATINGS (T
A
= 25 °C, unless otherwise noted)
PARAMETER SYMBOL LIMIT UNIT
Reference to GND
V+ -0.3 to +6
V
IN, COM, NC, NO
a
-0.3 to (V+ + 0.3)
Current (any terminal except NO, NC, or COM) 30
mAContinuous current (NO, NC, or COM) ± 300
Peak current (pulsed at 1 ms, 10 % duty cycle) ± 500
Storage temperature (D suffix) -65 to +150
°C
Package solder reflow conditions
d
QFN-16 250
Power dissipation (packages)
b
QFN-16
c
1385 mW
DG2523, DG2524
www.vishay.com
Vishay Siliconix
S16-2128-Rev. A, 17-Oct-16
3
Document Number: 67894
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
a. Room = 25 °C, full = as determined by the operating suffix.
b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
c. Typical values are for design aid only, not guaranteed nor subject to production testing.
d. Guarantee by design, not subjected to production test.
e. V
IN
= input voltage to perform proper function.
f. Crosstalk measured between channels.
SPECIFICATIONS (V+ = 3 V)
PARAMETER SYMBOL
TEST CONDITIONS
unless otherwise specified
V+ = 3 V, ± 10 %, V
IN
= 0.5 V or 1.4 V
e
TEMP.
a
LIMITS
-40 °C to +85 °C
UNIT
MIN.
b
TYP.
c
MAX.
b
Analog Switch
Analog signal range
d
V
NO
, V
NC
,
V
COM
Full 0 - V+ V
On-resistance R
ON
V+ = 2.7 V, V
COM
= 0 to 2.7 V, I
NO
, I
NC
= 100 mA Room - 0.40 0.55
Full - - 0.65
R
ON
flatness
d
R
ON
flatness
V+ = 2.7 V, V
COM
= 0 to V+,
I
NO
, I
NC
= 100 mA
Full - 0.03 0.08
R
ON
match
d
R
ON
Room - 0.05 -
Switch off leakage current
I
NO(off)
,
I
NC(off)
V+ = 5.5 V, V
NO
, V
NC
= 0.5 V / 4 V,
V
COM
= 4 V / 0.5 V
Room -1 0.04 1
nA
Full -5 - 5
I
COM(off)
Room -1 0.17 1
Full -5 - 5
Channel-on leakage
current
I
COM(on)
V+ = 5.5 V, V
NO
, V
NC
= V
COM
= 0.5 V / 4 V
Room -1 0.17 1
Full -5 - 5
Digital Control
Input high voltage V
INH
Full
1.2 - -
V
Input low voltage V
INL
--0.3
Input capacitance C
IN
Full - 5 - pF
Input current I
INL
or I
INH
V
IN
= 0 or V+ Full -1 - 1 μA
Dynamic Characteristics
Turn-on time t
ON
V
NO
or V
NC
= 1.5 V, R
L
= 50 , C
L
= 35 pF
Room - 38 60
μs
Full - - 70
Turn-off time t
OFF
Room - 0.43 1
Full - - 3
Break-before-make time t
d
Full 1 - -
Charge injection
d
Q
INJ
C
L
= 1 nF, V
GEN
= 1.5 V, R
GEN
= 0 Room - -19 - pC
-3 dB bandwidth BW R
L
= 50 , C
L
= 5 pF Room - 310 - MHz
Off-isolation
d
OIRR
R
L
= 50 , C
L
= 5 pF, f = 100 kHz
Room
--82-
dB
R
L
= 50 , C
L
= 5 pF, f = 1 MHz - -55 -
Crosstalk
d, f
X
TALK
R
L
= 50 , C
L
= 5 pF, f = 100 kHz - -89 -
R
L
= 50 , C
L
= 5 pF, f = 1 MHz - -61 -
Total harmonic distortion
plus noise
THD + N
2.5 V, signal peak to peak voltage
R
L
= 32 , f = 1 kHz
- -100 -
NO, NC off capacitance
d
C
NO(off)
f = 1 MHz Room
- 14.5 -
pF
C
NC(off)
- 14.5 -
Channel-on capacitance
d
C
NO(on)
-26-
C
NC(on)
-26-
Power Supply
Power supply range V+ 1.8 - 5.5 V
Power supply current I+ V
IN
= 0 or V+ Full - 29 60 μA
P1-P3P4-P6P7-P9P10-P10

DG2523DN-T1-GE4

Mfr. #:
Buy DG2523DN-T1-GE4
Manufacturer:
Vishay / Siliconix
Description:
Analog Switch ICs Dual DPDT Quad SPDT 0.4ohm Typ at 2.7V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet