74LVC07A_Q100 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 1 — 1 October 2012 4 of 15
NXP Semiconductors
74LVC07A-Q100
Hex buffer with open-drain outputs
7. Limiting values
[1] The minimum input voltage ratings may be exceeded if the input current ratings are observed.
[2] The output voltage ratings may be exceeded if the output current ratings are observed.
[3] For SO14 packages: above 70 C derate linearly with 8 mW/K.
For TSSOP14 packages: above 60 C derate linearly with 5.5 mW/K.
For DHVQFN14 packages: above 60 C derates linearly with 4.5 mW/K.
8. Recommended operating conditions
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage 0.5 +6.5 V
I
IK
input clamping current V
I
< 0 V 50 - mA
V
I
input voltage
[1]
0.5 +6.5 V
I
OK
output clamping current V
O
< 0 V 50 - mA
V
O
output voltage active mode
[2]
0.5 +6.5 V
high-impedance mode
[2]
0.5 +6.5 V
I
O
output current V
O
= 0 V to V
CC
-50mA
I
CC
supply current - 100 mA
I
GND
ground current 100 - mA
P
tot
total power dissipation T
amb
= 40 C to +125 C
[3]
- 500 mW
T
stg
storage temperature 65 +150 C
Table 5. Recommended operating conditions
Symbol Parameter Conditions Min Typ Max Unit
V
CC
supply voltage 1.65 - 5.5 V
functional 1.2 - - V
V
I
input voltage 0 - 5.5 V
V
O
output voltage active mode 0 - V
CC
V
high-impedance mode 0 - 5.5 V
T
amb
ambient temperature 40 - +125 C
t/V input transition rise and fall
rate
V
CC
= 1.65 V to 2.7 V 0 - 20 ns/V
V
CC
= 2.7 V to 5.5 V 0 - 10 ns/V
