(27/33)
006-02 / 20120414 / edlan_tla.fm
All specifications are subject to change without notice.
PACKAGING STYLES
Tray : 360pieces/box
RECOMMENDED SOLDERING CONDITION
FLOW SOLDERING
Preheating: 90 to 130°C for 30 to 45 seconds.
Soldering: 255°C max. 5±1 seconds
Perform flow soldering from the underside of the board.
The surface of plastic protrusions inserted into the board may
melt, but this causes no problems with regard to electrical
properties or mounting.
The cutted end of terminal has no plating(out of subject of solder
ability).
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
Temperature range: +5 to +40°C
Humidity: 10 to 75%RH max.
255˚C max.
130˚C
90˚C
Preheating: 30 to 45s
Time
(
s
)
Natural
cooling
5±1s
(28/33)
006-02 / 20120414 / edlan_tla.fm
All specifications are subject to change without notice.
TLA-6T785 ISO8802.3(IEEE802.3) 10/100BASE-TX
FEATURES
Product conforming to RoHS directive.
Pulse transformer, common mode choke, resistor and high with-
standing voltage capacitor are integrated into RJ-45 modular
jack.
Excellent common mode noise suppression.
Inductance is 200μH or greater (f=100kHz, DC bias=8mA).
The product features high quality, containing a self-winding
surface-mount pulse transformer and common mode choke.
GENERAL SPECIFICATIONS
SHAPES AND DIMENSIONS CIRCUIT DIAGRAM
RECOMMENDED PC BOARD PATTERN
ELECTRICAL CHARACTERISTICS
Ta=25°C
Pulse transformer 2
Common-mode choke 2
Port 1
Temperature ranges
Operating –40 to +85°C
Storage –40 to +85°C
Part No.
Turns ratio
„†‟:₷₸
‡‣•:₹₼
Inductance
(PH)min.
[DC bias 8mA, 100kHz]
-
-
Insertion loss
(dB)max.
[0.1 to 100MHz]
„‟-₷₸
₹₼-‡•
TLA-6T785
1CT:1 200 1.5
1CT:1 200 1.5
18.2±0.5
Dimensions in mm
16±0.5 12±0.5
18.5±0.5
₾₷
PCB CABLE
TX
RX
75Ω
75Ω
75Ω
75Ω
0.001μF
N.C. pin:
16.0typ.
11.43typ.
Dimensions in mm
8.89typ.
1.27typ.
4.55typ.8.89typ.
3.05typ.2.54typ.
2-ø2.1
8-ø0.9
2-ø3.2
Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(29/33)
006-02 / 20120414 / edlan_tla.fm
All specifications are subject to change without notice.
PACKAGING STYLES
Tray : 500pieces/box
RECOMMENDED SOLDERING CONDITION
FLOW SOLDERING
Preheating: 90 to 130°C for 30 to 45 seconds.
Soldering: 255°C max. 5±1 seconds
Perform flow soldering from the underside of the board.
The surface of plastic protrusions inserted into the board may
melt, but this causes no problems with regard to electrical
properties or mounting.
The cutted end of terminal has no plating(out of subject of solder
ability).
RECOMMENDED CONDITION FOR LONG TERM STORE
When it stores for a long term, please avoid place of high tempera-
ture and high humidity. Recommend that it uses after the delivery
within 1year.
Temperature range: +5 to +40°C
Humidity: 10 to 75%RH max.
255˚C max.
130˚C
90˚C
Preheating: 30 to 45s
Time
(
s
)
Natural
cooling
5±1s

ALT4532-171-T001

Mfr. #:
Manufacturer:
TDK
Description:
Audio & Signal Transformers Transformers Audio & Signal 1CT:1CT 170uH 2.5dB 35pF
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union