SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
H
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
H10
MB SERIES - MICRO-LIMIT SWITCHES
Actuator Hinge lever Roller lever Simulated roller lever
.
Actuator length, inches ±.031" .189 .276 .276 .370 .098 .185 .185 .280 .098 .185 .185 .280
±0.8mm 4.8 7.0 7.0 9.4 2.5 4.7 4.7 7.1 2.5 2.7 4.7 7.1
Fixed position, EH=rear EV=front EH EV EH EV EH EV EH EV EH EV EH EV
Operating force, ≤ grams
≤ ??? 100 45 85 40 110 50 95 40 115 60 95 50
Pre-travel, ≤ inches .177 .354 .197 .394 .177 .354 .197 .394 .177 .354 .197 .394
≤ mm 4.5 9 5 10 4.5 9 5 10 4.5 9 5 10
Overtravel, min. inches .030 .049 .030 .059 .030 .049 .030 .059 .030 .049 .030 .059
min. mm 0.75 1.25 0.75 1.5 0.75 1.25 0.75 1.5 0.75 1.25 0.75 1.5
Overtravel, max. inches .059 .098 .059 .118 .059 .098 .059 .118 .059 .098 .059 .118
max.mm 1.5 2.5 1.5 3 1.5 2.5 1.5 3 1.5 2.5 1.5 3
Movement diff.≤ inches .035 .059 .047 .071 .028 .059 .039 .071 .028 .059 .039 .071
≤ mm 0.9 1.5 1.2 1.8 0.7 1.5 1 1.8 0.7 1.5 1 1.8
Free position, ≤ inches .551 .709 .591 .787 .748 .866 .787 .945 .748 .866 .787 .945
≤ mm 14 18 15 20 19 22 20 24 19 22 20 24
Operating position, inches .421 .472 .437 .492 .622 .669 .638 .689 .630 .677 .646 .697
Tolerance inches ± .063 .118 .071 .138 .063 .118 .071 .138 .063 .118 .071 .138
Operating position, mm 10.7 12 11.1 12.5 15.8 17 16.2 17.5 16 17.2 16.4 17.7
Tolerance mm ± 1.6 3 1.8 3.5 1.6 3 1.8 3.5 1.6 3 1.8 3.5
Order code B B2 B1 B3 C C2 C1 C3 E E2 E1 E3
ACTUATORS AND SPECIFICATIONS
MECHANICAL OUTLINES
Hinge lever Roller lever Simulated roller lever
Normally open Change-over
Side view (w/solder terminal) Normally closed P.C. terminal
