MAX3095/MAX3096
±15kV ESD-Protected, 10Mbps, 3V/5V,
Quad RS-422/RS-485 Receivers
6 _______________________________________________________________________________________
_ Pin Description
NAME FUNCTION
1 B1 Inverting Receiver Input
2 A1 Noninverting Receiver Input
PIN
3 Y1
Receiver Output. Enabled when G = high OR G = low. Y1 is logic-high if V
A1
> V
B1
by 200mV, and low if
V
A1
< V
B1
by 200mV. Y1 is logic-high if V
A1
and V
B1
remain unconnected. Otherwise, the state is undeter-
mined. Y1 goes high impedance when the G = low
and
G = high.
4 G
Active-High Receiver Output Enable. A logic-high on this input enables all receivers. When taken low and G
is high, all receivers are shut down, and the outputs go high impedance.
8 GND Ground
7 B2 Inverting Receiver Input
6 A2 Noninverting Receiver Input
5 Y2 Receiver Output. Same functionality as Y1.
13 Y4 Receiver Output. Same functionality as Y1.
12
G
Active-Low Receiver Output Enable. A logic-low on this input enables all receivers. When G = high and G =
low, all receivers are shut down, and the outputs go high impedance.
11 Y3 Receiver Output. Same functionality as Y1.
10 A3 Noninverting Receiver Input
9 B3 Inverting Receiver Input
Typical Operating Characteristics (continued)
(V
CC
= 5V for MAX3095, V
CC
= 3.3V for MAX3096, T
A
= +25°C, unless otherwise noted.)
14 A4 Noninverting Receiver Input
15 B4 Inverting Receiver Input
16 V
CC
Positive Supply