RC1117M285

RC1117 PRODUCT SPECIFICATION
REV. 1.3.2 10/16/03 7
Mechanical Dimensions
3-Lead TO-252 Package
D
D1
GAGE PLANE
NOTES: UNLESS OTHERWISE SPECIFIED
A) ALL DIMENSIONS ARE IN MILLIMETERS.
B) THIS PACKAGE CONFORMS TO JEDEC, TO-252,
ISSUE C. VARIATION AA & AB, DATED NOV. 1999.
C) DIMENSIONING AND TOLERANCING PER
ASME Y14.51994.
D) HEAT SINK TOP EDGE COULD BE IN CHAMFERED
CORNERS OR EDGE PROTRUSION.
E) DIMENSIONS L3, D, E1 & D1 TABLE:
OPTION AA OPTION AB
0.89 1.27 1.52 2.03
5.97 6.22 5.33 5.59
4.32 MIN 3.81 MIN
5.21 MIN
L3
D
E1
D1 4.57 MIN
0.51
SEATING PLANE
DETAIL A
(1.54)
1.78
1.40
0.61
0.48
10°
0°
0.127 MAX
(ROTATED 90°
SCALE 12X
E1
L3
1
1
2
3
1
2
3
4
3
4
6.73
6.35
1.02
0.84
6.25
6.00 MIN
6.50 MIN
4.80
2.38
2.18
0.58
0.48
0.10 B
10.41
9.40SEE
DETAIL A
3.00 MIN
1.40 MIN
LAND PATTERN RECOMMENDATION
1.14
0.78
0.89
0.54
SEE
NOTE D
(0.59)
2.29
5.46
5.21
4.57
0.25 A C
MM
2.90
2.30
C
A
B
PRODUCT SPECIFICATION RC1117
8 REV. 1.3.2 10/16/03
Mechanical Dimensions
3-Lead TO-263 Package
A .160 .190 4.06 4.83
Symbol
Inches
Min. Max. Min. Max.
Millimeters
Notes
b .020 .036 0.51 0.91
b2
.049 .051 1.25 1.30
c2
.045 .055 1.14 1.40
D
.340 .380 8.64 9.65
.380 .405 9.65 10.29
.100 BSC
E
e
L .575 .625 14.61 15.88
.090
.110
2.29 2.79
α
L1
L2
.055 1.40
.017 .019 0.43 0.78
R
0° 8° 0° 8°
Notes:
1. Dimensions are exclusive of mold flash and metal burrs.
2. Standoff-height is measured from lead tip with ref. to Datum -B-.
3. Foot length is measured with ref. to Datum -A- with lead surface
(at inner R).
4. Dimensiuon exclusive of dambar protrusion or intrusion.
5. Formed leads to be planar with respect to one another at seating
place -C-.
2.54 BSC
E
@PKG/
@HEATSINK
D
L2
A
-C-
L
c2
L1
R (2 PLCS)
-A--B-
E-PIN
b2
b
e
PRODUCT SPECIFICATION RC1117
LIFE SUPPORT POLICY
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, and (c) whose failure to
perform when properly used in accordance with
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
10/16/03 0.0m 005
Stock#DS30001117
2001 Fairchild Semiconductor Corporation
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
Ordering Information
Product Number Output Package
RC1117DT Adjustable TO-252 in tape and reel
RC1117M Adjustable TO-263
RC1117MT Adjustable TO-263 in tape and reel
RC1117ST Adjustable SOT-223 in tape and reel
RC1117D25T 2.5 volt TO-252 in tape and reel
RC1117M25 2.5 volt TO-263
RC1117M25T 2.5 volt TO-263 in tape and reel
RC1117S25T 2.5 volt SOT-223 in tape and reel
RC1117M285 2.85 volt TO-263
RC1117M285T 2.85 volt TO-263 in tape and reel
RC1117S285T 2.85 volt SOT-223 in tape and reel
RC1117D33T 3.3 volt TO-252 in tape and reel
RC1117M33 3.3 volt TO-263
RC1117M33T 3.3 volt TO-263 in tape and reel
RC1117S33T 3.3 volt SOT-223 in tape and reel
RC1117D5T 5 volt TO-252 in tape and reel
RC1117M5 5 volt TO-263
RC1117M5T 5 volt TO-263 in tape and reel
RC1117S5T 5 volt SOT-223 in tape and reel

RC1117M285

Mfr. #:
Manufacturer:
ON Semiconductor / Fairchild
Description:
LDO Voltage Regulators 1A Low Dropout Lin
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union