OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AA2810ASESK

P1-P3P4-P6
SPEC NO: DSAK2443 REV NO: V.3A DATE: DEC/04/2011 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201005913
Part Number: AA2810ASESK
Super Bright Orange
Description
The Super Bright Orange device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.0039") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
2.8X0.8mm RIGHT ANGLE SMD CHIP LED
LAMP
Features
z 2.8mmX0.8mm right angle SMT LED, 1.2mm thickness.
z Low power consumption.
z Ideal for backlight and indicator.
z Various colors and lens types available.
z Moisture sensitivity level : level 3.
z RoHS compliant.
SPEC NO: DSAK2443 REV NO: V.3A DATE: DEC/04/2011 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201005913
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might leads to damage and premature failure of the LED.
1. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
2. As silicone encapsulation is permeable to gases, some corrosive substances such as H
2
S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAK2443 REV NO: V.3A DATE: DEC/04/2011 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201005913
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
AA2810ASESK Super Bright Orange (AlGaInP) Water Clear
150 250
*120 *250
110
°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Orange 610 nm I
F=20mA
λD [1] Dominant Wavelength Super Bright Orange 601 nm I
F=20mA
Δλ1/2 Spectral Line Half-width Super Bright Orange 29 nm I
F=20mA
C Capacitance Super Bright Orange 15 pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA
I
R Reverse Current Super Bright Orange 10 uA VR=5V
Parameter Super Bright Orange Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 195 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
P1-P3P4-P6

AA2810ASESK

Mfr. #:
Buy AA2810ASESK
Manufacturer:
Kingbright
Description:
Standard LEDs - SMD RA Org 601nm 250mcd 110deg Water Clr
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet