OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ELG-100-C500A

P1-P3P4-P6P7-P9P10-P11
File Name:ELG-100-C-SPEC 2018-05-29
70~100W Constant Current Mode LED Driver
ELG-100-C series
■ Features ■ Applications
■ Model Encoding
- C500ELG -
100
A
Rated wattage
Series name
■ Description
ELG-100-C series is a 100W LED AC/DC driver featuring the constant current mode and
high voltage output. ELG-100-C operates from 100~360VAC and offers models with different
rated current ranging between 350mA and 1400mA. Thanks to the high efficiency up to 92%,
with the fanless design, the entire series is able to operate for -40 ~+90 case temperature under℃℃
free air convection. The design of metal housing and IP67/IP65 ingress protection level allows
this series to fit both indoor and outdoor applications. ELG-100-C is equipped with various function
options, such as dimming methodologies, so as to provide the optimal design flexibility for LED
lighting system.
Constant Current mode output
Metal housing design with functional Ground
Built-in active PFC function
<0.5WNo load / Standby power consumption
IP67 / IP65 rating for indoor or outdoor installations
Function options: output adjustable via potentiometer;
3 in 1 dimming (dim-to-off); Smart timer dimming; DALI
Typical lifetime>50000 hours
5 years warranty
LED street lighting
LED harbor lighting
LED bay lighting
LED greenhouse lighting
LED flood lighting
Type HL for use in Class I, Division 2
(Classified) location.hazardous
Function options
Type
Blank
A
B
IP Level
IP67
IP65
IP67
Io fixed.
Io adjustable through built-in potentiometer.
3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)
Function Note
In Stock
In Stock
In Stock
Rated output current (350/500/700/1050/1400mA)
DA
Dx
D2
IP67
IP67
IP67
DALI control technology.
Built-in Smart timer dimming function by user request.
Built-in Smart timer dimming and programmable function.
In Stock
By request
In Stock
MM
110
IP67
IP65
(for ELG-100-C1050,C1400 only)
(for DA-Type only)
SELV
(for ELG-100-C1050,1400 only)
Input wiring type
Blank:2-wire input for standard model
-
{
3Y:3-wire input for standard model
Type HL
IS 15885(Part 2/Sec13)
R-41027766
THOMAS SAMUEL
THOMAS SAMUEL
(for 700A,1050Aonly)
AB IP65
Io adjustable through built-in potentiometer &
3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)
In Stock
70~100W Constant Current Mode LED Driver
ELG-100-C series
SPECIFICATION
MODEL
RATED CURRENT
RATED POWER
OUTPUT
CURRENT ADJ. RANGE
SET UP TIME
Note.4
VOLTAGE RANGE Note.3
FREQUENCY RANGE
POWER FACTOR
(Typ.)
EFFICIENCY (Typ.)
AC CURRENT(Typ.)
INPUT
INRUSH CURRENT
(Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
EMC IMMUNITY
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
OVER TEMPERATURE
OVER VOLTAGE
(Please refer to "STATIC CHARACTERISTIC" section)
47 ~ 63Hz
PF 0.97/115VAC, PF 0.95/230VAC, PF 0.92/277VAC@full load≧≧≧
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
<0.75mA / 277VAC
Compliance to
EN55015,EN61000-3-2 Class C (@ load 60%) ; EN61000-3-3≧ ;EAC TP TC 020; GB17743 GB17625.1,
20 ~ 95% RH non-condensing
-40 ~ +80 , 10 ~ 95% RH℃
±℃ ℃0.03%/ (0 ~ 60 )
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
ENVIRONMENT
EMC EMISSION
SAFETY &
EMC
PROTECTION
Shut down o/p voltage, re-power on to recover
Shut down o/p voltage, re-power on to recover
SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed
I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
CURRENT TOLERANCE
±5.0%
CONSTANT CURRENT REGION
Note.2
TOTAL HARMONIC DISTORTION
OPEN CIRCUIT VOLTAGE
(max.)
Adjustable for A/AB-Type only (via built-in potentiometer)
COLD START 40A(twidth= s measured at 50% Ipeak)/230VAC760 Per NEMA 410μ;
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
Tcase=-40 ~ +90 (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)℃
MAX. CASE TEMP.
Tcase=+90℃
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level ( )surge immunity Line-Earth 6KV, Line-Line 4KV ;EAC TP TC 020
UL8750 independent, EN62384(type”HL”), CSA C22.2 No. 250.13-12; ;EN/AS/NZS 61347-1, EN/AS/NZS 61347-2-13
1. All parameters NOT specially mentioned are measured at 230VAC input, rated and 25 of ambient temperature.current ℃
2. Please refer to "DRIVING METHODS OF LED MODULE". For DA-Type, Constant Current region is 60%~100% of maximum voltage
under rated power delivery.
3. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details
4. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80 or less.℃
7. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
8. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
CURRENT RIPPLE 5.0% max. @rated current
100 ~ 305VAC 142 ~ 431VDC continue,320VAC for 24Hrs; 360VAC for 1Hr
ELG-100-C1050
48 ~ 95V
1050mA
99.75W
100 ~ 200V
ELG-100-C500
500mA
100W
ELG-100-C1400
35 ~ 72V
1400mA
100.8W
143 ~ 286V
ELG-100-C350
ELG-100-C700
350mA
100.1W
71 ~ 143V
700mA
100.1W
105V
210V
75V
297V
149V
525 ~ 1050mA
250 ~ 500mA
700 ~ 1400mA
175 ~ 350mA
350 ~ 700mA
90%
91%
90%
92%
90%
1.1A / 115VAC 0.6A / 230VAC 0.5A/277VAC
110 ~ 130V
222 ~ 242V
79 ~ 95V
305 ~ 333V
154 ~ 174V
199 63* *35.5 mm (L*W*H)
0.85kg; 16pcs/14.2kg/0.72CUFT
EAC TP TC 004 BIS IS15885(for 700A,1050A only); ; IP65 or IP67 approved; GB19510.1 GB19510.14,
THD< 20%(@load 50%/115VC; @load 60%/230VAC; @load 75%/277VAC)≧≧ ≧
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
1000ms/115VAC 500ms/230VAC
No load power consumption <0.5W for Blank / A / Dx / D2-Type
NO LOAD / STANDBY
POWER CONSUMPTION
Standby power consumption <0.5W for B / AB / DA-Type
DALI STANDARDS Compliance to IEC62386-101, 102, 207 for DA-Type only
1087.5K hrs min. Telcordia SR-332 (Bellcore) 300.6Khrs min. MIL-HDBK-217F (25 )℃
70W
70W
70W
70.35W
70W
200VAC ~ 305VAC
100VAC ~ 180VAC
File Name:ELG-100-C-SPEC 2018-05-29
70~100W Constant Current Mode LED Driver
ELG-100-C series
BLOCK DIAGRAM
DETECTION
PWM & PFC
CIRCUIT
O.L.P.O.T.P.
EMI FILTER
RECTIFIERS
POWER
SWITCHING
FILTER
&
RECTIFIERS
Vo+
Vo-
I/P
CONTROL
O.V.P.
&
O.L.P.
PFC
CIRCUIT
PFC fosc : 50~120KHz
PWM fosc : 60~130KHz
DIM+
(B Type)
DIM-
DRIVING METHODS OF LED MODULE
※ This series works in constant current mode to directly drive the LEDs.
Typical output current normalized by rated current (%)
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
Should there be any compatibility issues, please contact MEAN WELL.
100
50
(min.)
Vo(%)
50
100
Io(%)
Constant
Current area
Hiccup
Protection
◎ This characteristic applies to Blank/A/B/AB/DX/D2-Type,
For DA-Type, the Constant Current area is 60%~100% Vo.
CASE :Protective Earth
File Name:ELG-100-C-SPEC 2018-05-29
P1-P3P4-P6P7-P9P10-P11

ELG-100-C500A

Mfr. #:
Buy ELG-100-C500A
Manufacturer:
MEAN WELL
Description:
LED Power Supplies 500mA 100-200V 100W IP65 CC Adj W/Pot
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet