DATA SHEET
www.panduit.com
Category 5e/Class D 8-position, industry
standard keystone jack module terminates 4-pair,
22 – 26 AWG, 100 ohm unshielded pair cable.
Jack module uses a punchdown tool to properly
and securely terminate each conductor for optimum
performance. The jack module contains a color
coded label for T568A and T568B wiring schemes.
A retention cap provides additional strain relief.
applications
Applications include:
• Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), and 1000BASE-T (Gigabit Ethernet)
• 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM
• Token Ring 4/16
• Voice over internet protocol (VoIP)
NetKey
®
Jack Modules
Module: NKP5E88M*
Convenience
pack of
25 modules: NKP5E88M*- Q
NetKey
®
Patch Cords
Foot lengths: NK5EPC3**Y
Meter lengths: NK5EPC1M^Y
Termination and Cable Prep Tools
Punchdown tool: PDT110‡
Punchdown base: NKSPB
JackRapid
+
Termination Tool: JR-PAN-2‡‡
Cable
snipping tool: CWST
Cable
stripping tool: CJAST
*To designate a color, add suffix IW (Off White),
EI (Electric Ivory), IG (Int’l Gray), WH (White),
BL (Black), OR (Orange), RD (Red), BU (Blue),
GR (Green) or YL (Yellow).
**For standard lengths other than 3 feet (5, 7,
10, 14 or 20) change the length designation in
part number to the desired length. For standard
cable colors other than Off White, add suffix
BU (Blue), GR (Green), RD (Red) or YL (Yellow)
before the Y at the end of the part number. For
example, the part number for a blue 5 foot patch
cord is NK5EPC5BUY.
^For standard lengths other than 1 meter (2, 3,
4 or 5) change the length designation in part
number to the desired length. For standard
cable colors other than Off White, add suffix
BU (Blue), GR (Green), RD (Red) or YL (Yellow)
before the Y at the end of the part number. For
example, the part number for a blue 5 meter
patch cord is NK5EPC5MBUY.
‡Terminates the NetKey
®
Keystone
Punchdown Jack Module and NetKey
®
Patch Panel.
‡‡Terminates the NetKey
®
Keystone Punchdown
Jack Module. Fluke JackRapid Termination Tool
available through distribution. To locate the local
office, visit www.flukenetworks.com/contact.
+
JackRapid is a trademark of Fluke Networks.
NetKey
®
Network Components
NetKey
®
Category 5e Component-Rated
Punchdown Jack Modules
technical information
Category 5e/Class D
performance:
Exceeds ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D
channel requirements at swept frequencies up to 100 MHz
Meets ANSI/TIA-568-C.2 and ISO 11801 Category 5e component
requirements at swept frequencies up to 100 MHz
FCC compliance:
Complies with ANSI/TIA-1096A (formerly FCC Part 68); contacts
plated with 50 microinches of gold
IEC compliance:
Meets IEC 60603-7
PoE compliance:
Supports IEEE 802.3af/802.3at and proposed 802.3bt type 3 and
type 4 PoE applications
UL rated:
UL 1863 approved
RoHS compliance:
Compliant
key features and benefits
100% performance
tested
Confidence that each jack module delivers specified
performance
110 style punchdown
termination
Utilizes industry standard termination style and includes wire
retention cap
Modular
Universal keystone jack modules snap in and out of all NetKey
®
Faceplates, Modular Patch Panels, and Surface Mount Boxes for
fast moves, adds, and changes
Individually serialized
Marked with quality control number for future traceability
Convenience packaging
(optional)
25 jacks packaged in one easy to open container, eliminating
the time to open each individual package and reducing on-site
waste; ideal for high volume installations
specifications
