CUSTOMER DRAWING
Raychem Devices
CUSTOMER DRAWING
TITLE:
SOLDERSLEEVE* STUB SPLICE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO:
D-110-0172
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
REV:
B
DATE:
October 11, 2013
DRAWN BY:
T.NGUYEN
CAGE CODE:
06090
ECO NUMBER:
13-015998
SCALE:
NTS
SIZE:
A
SHEET:
1 of 1
© 2013 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
17.9±1.3 (.705±.050)
16.8±0.8 (.661±.031)
7.50±1.0 (.295±.039)
Ø3.45 (.135) MIN
Ø2.75 (.108) MIN
1
2
3
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
3. END CLOSURE: Thermally stabilized thermoplastic.
APPLICATION
1. This part is designed to make a stub splice with wires having a combined conductor CMA of between 350 and 1400 circular mils
and a combined jacket diameter between 1.27 (.050) and 3.40 ( .135).
2. Part may be installed by convection heating.
3. Temperature range: -55°C to +150°C.
