https://www.phoenixcontact.com/us/products/2903305
3/7/14Page2/6
Relay Module-RIF-2-RPT-LV-120AC/4X21-2903305
Technical data
Coil side
Protective circuit Varistor
Contact side
Contact type 4 PDTs
Contact material AgNi
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (At 24 mA)
Maximum inrush current 16 A (20 ms, N/O contact)
Min. switching current 5 mA (at 24 V)
Limiting continuous current 5 A (see diagram)
Interrupting rating (ohmic load) max. 120 W (at 24 V DC)
124 W (at 48 V DC)
108 W (at 60 V DC)
52 W (at 110 V DC)
48 W (at 220 V DC)
1250 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (24 V (DC13))
1 A (230 V (AC 15))
Connection data
Connection method Push-in connection
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section stranded min. 0.14 mm²
Conductor cross section stranded max. 1.5 mm²
Conductor cross section stranded, with ferrule with plastic sleeve min. 0.14 mm²
Conductor cross section stranded, with ferrule with plastic sleeve max. 1.5 mm²
Conductor cross section stranded, with ferrule without plastic sleeve min. 0.14 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max. 1.5 mm²
Conductor cross section AWG/kcmil min. 26
Conductor cross section AWG/kcmil max 16
Stripping length 8 mm
General
Test voltage relay winding/relay contact
2.5 kV
rms
(50 Hz, 1 min.)
Test voltage relay contact/relay contact
2 kV
rms
(50 Hz, 1 min.)
Operating mode 100% operating factor
Degree of protection IP20 (Relay socket)
RT I (Relay)