SPECIFICATION
PS-25-3.3 PS-25-5 PS-25-7.5 PS-25-12 PS-25-13.5 PS-25-15 PS-25-24 PS-25-27 PS-25-48
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY(Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
WORKING HUMIDITY
WORKING TEMP.
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVER VOLTAGE
AC CURRENT (Typ.)
3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V
5A 5A 3.3A 2.1A 1.9A 1.7A 1A 0.9A 0.5A
0 ~ 5A 0 ~ 5A 0 ~ 3.3A 0 ~ 2.1A 0 ~ 1.9A 0 ~ 1.7A 0 ~ 1A 0 ~ 0.9A 0 ~ 0.5A
16.5W 25W 24.75W 25.2W 25.65W 25.5W 24W 24.3W 24W
80mVp-p 80mVp-p 80mVp-p 100mVp-p 100mVp-p 100mVp-p 240mVp-p 240mVp-p 350mVp-p
±3.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0%
±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2%
±2.5% ±2.0% ±2.0% ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5%
200ms, 20ms/230VAC 200ms, 30ms/115VAC at full load
100ms/230VAC 20ms/115VAC at full load
85 ~ 264VAC 120 ~ 370VDC
47 ~ 63Hz
66% 74%
5.75 ~ 6.75V 8.6 ~ 10.1V 13.8 ~ 16.2V 15.5 ~ 18.2V 17.3 ~ 20.3V 27.6 ~ 32.4V 31 ~ 36.5V 55.2 ~ 64.8V
76% 78% 78% 78% 79% 79% 79%
0.6A/115VAC 0.4A/230VAC
COLD START 36A
<0.5mA / 240VAC
Above 105% rated output power
3.8 ~ 4.46V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Shut down o/p voltage, re-power on to recover
-10 ~ +60 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH℃
±℃ ℃0.03%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min.each along X, Y, Z axes
576.4Khrs min. MIL-HDBK-217F (25 )℃
107*61*28mm (L*W*H)
0.14Kg; 96pcs/15Kg/1.3CUFT
File Name:PS-25-SPEC 2017-07-07
OVER TEMPERATURE
UL60950-1, TUV EN60950-1 approved
Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5, light industry level, criteria A
25W Single Output Switching Power Supply
PS-25 series
Universal AC input / Full range
Low leakage current <0.5mA
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 100KHz
Low cost
High reliability
2 years warranty
■
Features :
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
ENVIRONMENT
SAFETY &
EMC
(Note 4)
PROTECTION
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.360 360 For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
5. Heat Sink HS1,HS2 can not be shorted.
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
Protection type : Shut off o/p voltage, clamping by zener diode
EMC IMMUNITY
EMC EMISSION
