OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TCMT1101

P1-P3P4-P6P7-P9
CNY17F
www.vishay.com
Vishay Semiconductors
Rev. 2.2, 08-Jan-14
1
Document Number: 83607
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Optocoupler, Phototransistor Output, no Base Connection
DESCRIPTION
The CNY17F is an optocoupler consisting of a gallium
arsenide infrared emitting diode optically coupled to a
silicon planar phototransistor detector in a plastic plug-in
DIP-6 package.
The coupling device is suitable for signal transmission
between two electrically separated circuits. The potential
difference between the circuits to be coupled is not allowed
to exceed the maximum permissible reference voltages.
In contrast to the CNY17 series, the base terminal of the
F type is not conected, resulting in a substantially improved
common-mode interference immunity.
FEATURES
• Isolation test voltage, 5000 V
RMS
• No base terminal connection for improved
common mode interface immunity
• Long term stability
• Industry standard dual-in-line package
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
AGENCY APPROVALS
Safety application model number covering all products in
this datasheet is CNY17F. This model number should be
used when consulting safety agency documents.
• UL file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• BSI: EN 60065, EN 60950-1
• FIMKO EN60950
• CQC GB8898-2011
Notes
• Additional options may be possible, please contact sales office.
(1)
Also available in tubes; do not put T on end.
1
2
3
6
5
4
NC
C
E
A
C
NC
i179004-14
ORDERING INFORMATION
CNY17F- #X0##T
PART NUMBER CTR
BIN
PACKAGE OPTION TAPE
AND
REEL
AGENCY CERTIFIED/PACKAGE CTR (%)
UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320
DIP-6 CNY17F-1 CNY17F-2 CNY17F-3 CNY17F-4
DIP-6, 400 mil, option 6 CNY17F-1X006 CNY17F-2X006 CNY17F-3X006 CNY17F-4X006
SMD-6, option 7 CNY17F-1X007
(1)
CNY17F-2X007T
(1)
CNY17F-3X007T
(1)
CNY17F-4X007T
(1)
SMD-6, option 9 CNY17F-1X009T
(1)
CNY17F-2X009T
(1)
CNY17F-3X009T
(1)
CNY17F-4X009T
(1)
VDE, UL, cUL, BSI, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320
DIP-6 CNY17F-1X001 CNY17F-2X001 CNY17F-3X001 CNY17F-4X001
DIP-6, 400 mil, option 6 CNY17F-1X016 CNY17F-2X016 CNY17F-3X016 CNY17F-4X016
SMD-6, option 7 CNY17F-1X017
(1)
CNY17F-2X017
(1)
CNY17F-3X017
(1)
CNY17F-4X017
(1)
SMD-6, option 9 CNY17F-1X019 CNY17F-2X019
(1)
CNY17F-3X019
(1)
-
7.62 mm 10.16 mm
> 8 mm
8 mm typ.
Option 7
Option 6
Option 9
DIP-6
CNY17F
www.vishay.com
Vishay Semiconductors
Rev. 2.2, 08-Jan-14
2
Document Number: 83607
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1)
Refer to reflow profile for soldering conditions for surface mounted parts (SMD). Refer to wave profile for soldering conditions for through
hole parts (DIP).
Fig. 1 - Total Power Dissipation vs. Ambient Temperature
ABSOLUTE MAXIMUM RATINGS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Reverse voltage V
R
6V
DC forward current I
F
60 mA
Surge forward current t ≤ 10 μs I
FSM
2.5 A
Power dissipation P
diss
100 mW
OUTPUT
Collector emitter breakdown voltage BV
CEO
70 V
Collector current I
C
50 mA
Collector peak current t
p
/T = 0.5, t
p
≤ 10 ms I
CM
100 mA
Output power dissipation P
diss
150 mW
COUPLER
Isolation test voltage between emitter and
detector
t = 1 min V
ISO
5000 V
RMS
Storage temperature range T
stg
-55 to +150 °C
Ambient temperature range T
amb
-55 to +110 °C
Junction temperature T
j
100 °C
Soldering temperature
(1)
2 mm from case, ≤ 10 s T
sld
260 °C
Total power dissipation P
diss
250 mW
ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage I
F
= 60 mA V
F
1.39 1.65 V
Breakdown voltage I
R
= 10 μA V
BR
6V
Reverse current V
R
= 6 V I
R
0.01 10 μA
Capacitance V
R
= 0 V, f = 1 MHz C
O
25 pF
OUTPUT
Collector emitter capacitance V
CE
= 5 V, f = 1 MHz C
CE
5.2 pF
Base collector capacitance V
CE
= 5 V, f = 1 MHz C
BC
6.5 pF
Emitter base capacitance V
CE
= 5 V, f = 1 MHz C
EB
7.5 pF
0
50
100
150
200
250
300
0 20 40 60 80 100 120
P
tot
- Total Power Dissipation (mW)
T
amb
- Ambient Temperature (°C)
Coupled device
Phototransistor
IR-diode
CNY17F
www.vishay.com
Vishay Semiconductors
Rev. 2.2, 08-Jan-14
3
Document Number: 83607
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
Note
• Current transfer ratio I
C
/I
F
at V
CE
= 5 V, 25 °C and collector emitter leakage current by dash number.
COUPLER
Collector emitter, saturation voltage I
F
= 10 mA, I
C
= 2.5 mA V
CEsat
0.25 0.4 V
Coupling capacitance C
C
0.6 pF
Collector emitter, leakage current V
CE
= 10 V
CNY17F-1 I
CEO
250nA
CNY17F-2 I
CEO
250nA
CNY17F-3 I
CEO
5 100 nA
CNY17F-4 I
CEO
5 100 nA
CURRENT TRANSFER RATIO (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
I
C
/I
F
I
F
= 10 mA
CNY17F-1 CTR 40 80 %
CNY17F-2 CTR 63 125 %
CNY17F-3 CTR 100 200 %
CNY17F-4 CTR 160 320 %
I
F
= 1 mA
CNY17F-1 CTR 13 30 %
CNY17F-2 CTR 22 45 %
CNY17F-3 CTR 34 70 %
CNY17F-4 CTR 56 90 %
SWITCHING CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
LINEAR OPERATION (without saturation)
Turn-on time
I
F
= 10 mA, V
CC
= 5 V,
R
L
= 75 Ω
t
on
3μs
Rise time
I
F
= 10 mA, V
CC
= 5 V,
R
L
= 75 Ω
t
r
2μs
Turn-off time
I
F
= 10 mA, V
CC
= 5 V,
R
L
= 75 Ω
t
off
2.3 μs
Fall time
I
F
= 10 mA, V
CC
= 5 V,
R
L
= 75 Ω
t
f
2μs
Cut-off frequency
I
F
= 10 mA, V
CC
= 5 V,
R
L
= 75 Ω
f
CO
110 kHz
SWITCHING OPERATION (with saturation)
Turn-on time
I
F
= 20 mA CNY17F-1 t
on
3μs
I
F
= 10 mA
CNY17F-2 t
on
4.2 μs
CNY17F-3 t
on
4.2 μs
I
F
= 5 mA CNY17F-4 t
on
6μs
Rise time
I
F
= 20 mA CNY17F-1 t
r
2μs
I
F
= 10 mA
CNY17F-2 t
r
3μs
CNY17F-3 t
r
3μs
I
F
= 5 mA CNY17F-4 t
r
4.6 μs
Turn-off time
I
F
= 20 mA CNY17F-1 t
off
18 μs
I
F
= 10 mA
CNY17F-2 t
off
23 μs
CNY17F-3 t
off
23 μs
I
F
= 5 mA CNY17F-4 t
off
25 μs
Fall time
I
F
= 20 mA CNY17F-1 t
f
11 μs
I
F
= 10 mA
CNY17F-2 t
f
14 μs
CNY17F-3 t
f
14 μs
I
F
= 5 mA CNY17F-4 t
f
15 μs
ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
P1-P3P4-P6P7-P9

TCMT1101

Mfr. #:
Buy TCMT1101
Manufacturer:
Vishay Semiconductors
Description:
Transistor Output Optocouplers Phototransistor Out
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet